how do i get my tail lights to look like this?
http://www.bodykits.com/Extreme-Dime...103707/617764/

 

In that photo all those are are covers that you buy. Tinted or smoked taillights are painted. You sand your lights with 800 grit, then you spray over reduced black basecoat on them to your darkness you want, and then you clear them.

 

Do you have a link for where to buy covers at?

 

i tint tails at my shop, any darkness you want....

 

Spray on VHT Night Shades....It'll give you then same looks, for the fraction of the cost of having a body shot do it, or even buying the reducer, paint, & clear yourself....Not to mention. Do you have a god compressor & body paint gun to spray that stuff?

VHT Night Shades is the home-method & can look just as good.

 

vht compared to my process aint even close....and will never look anywhere as good, and not to mention the quality of the materials used.

 

hawksthirdgen sells the smoked cover for thirgen camaros and firebirds. they are a decent price too about 80 bucks i think. check it out...http://www.hawksthirdgenparts.com/fi...blackpair.aspx

 

Hawk's thirdgen = overpriced and a half.

I have the blackout covers for my lights. But they're for the Camaro, not the firebird. I don't know if they make covers for 3rd gen Firebird? Not sure. But I got them from Ebay Motors for 39.95 + 12 for shipping. Just search up (Car name) tail light cover

 

Isn't there a black film you can purchase to stick on the tailights? To save the hassle of having to purchase blackouts as well as the work it takes to sand and spray?

 

I once painted the inside of a lens on a previous car with a rattle can, worked fine, neither pealing nor fading occurred as time passed. Sure to use fusion paint for plastic by Krylon.