Is anyone here using one of the WS6 Ram Air Style hoods from RAMAIRHOOD.COM for a 3rd gen Firebird? I was thinking about getting one for my 92.

Thanks

Mark

 

My friend has one from them on his 82 Trans Am.
This pic was before the hood was adjusted.

 

how did you adjust the hood?

 

We lowered the latching mechanism on the car to bring it down.

 

We spent hours adjusting mine. the back drivers side stuck up and we had to adjust the hinge to lower the corner. in front had to adjust bumper cover, rubber stops, headlight on one side, but you can expect to have problems with aftermarket fiberglass. I'm now building a frame around the new air filter box to seal with the hood so that the ram air has a chance of working. you also need to open the inside of the air ducts the seal them so the air dose not flow through the hood.

 

I was trying to compair the two hoods from RamAirHood.com and American Sports Car Design, but it seems RamAir is not interested in doing business or answering e-mails. Anybody ever seem both of these hoods?

Mark

 

My friend has the RamAirHoods one and I have the ASCD one.


This is the ASCD



This is the RamAirHoods one. (hood wasn't latched down in this pic and I don't have another one with it latched)

 

<img src="http://elite-fraggers.org/sonarun/TransAm/04-08-03%20TransAm/04080011%20-%20Medium.jpg">

The car may look familliar

 

Every time I see that car I think it gets prettier! Which hood is that?

Mark

 

myne

 

Its the GT Auto hood, aka RamAirHood.com

check the link at the top of the page

 

mine

 

So you have experience with both suppliers, what is the better hood all around?