i have a 1987 trans am and im lookin at putting some c6 zo6 rims on it now ive been told by alot of people that it will not just fit on there some sort of spacer is needed. im not good w/ the rim stuff so any help would be appreciated

 

Theirs a user on the board named Andris Skulte , he runs

http://www.skulte.com/

He builds these wheel adapters. Speaking from personal experience and the fact that he probably has a vehicle with Z06 wheels.. this is the man to talk too.

 

I do not think Andris Skulte is making adapters anymore.

 

Peep this thread, most if not all got from skulte, and your likely to see some Z06's on their.

https://www.thirdgen.org/forums/auto...ml#post4191949

 

If you go to Skulte's main page, he posted up that he will no longer be making the spacers. So all those people on the other page may have gotten them from Skulte, but they have been discontinued.

 

You can definitely buy these spaces anywhere online. Just look around on google and make sure that their made of high quality materials, that way there are no safety issues.

 

You need to figure out what size spacer you need for these rims. After you figure that out I would STRONGLY recommend ebay. If you go to ebay and just enter 5x4.75 wheel spacers, you should be able to find what you need. I got mine for there and I must say I am impresed with that I got. Make sure the ones you get are of good quality and that they are a 5x4.75 to 5x4.75 adapter. This way you are not changing bolt patern, just offset.

I hope this works out for you

 

What blasphemy is this!!

 

2 in all around. i think some people have gone smaller on the front but i know 2 in is more then enough.

 

Agree. I used 2in around on my car

 

thanks guys really helpfull ill have pics posted soon.