Stock Fin Removal
Stock Fin Removal
on the side of the car, where the fin raps around, how do i get the top bolt off? if any of you have aftermarket wings, or the stock wing, you know what bolt im talkin bout PAIN N THE *** !! please help me out on how to get this out!
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Based on your vaugeness,, guessing you're talking about the 3 piece spoiler on a camaro,, the outer pieces of the spoiler on the ¼ panels are held with 3 nuts, to accessable from inside & the 3rd you'll need to pop out the taillamps to get to. There is a hole right in that top corner to access the nut. Just a guess based on the lack of info.
------------------
The mind is like a parachute, it only works when its open
------------------
- my Formula Homepage
- Collision P/Ns & Diagrams (Nearly complete now!)
The mind is like a parachute, it only works when its open
well your reply sounded intellegent, but ya know what, i havnt seen any other 3rd gen stock fins that wrap around the side of the car, if you know of any others, you can feel free to tell me, till then, dont be an *** ...but you are right, and thanks, ill have to try that tomorrow.
I've never seen any Camaro, from any generation, that had fins. I too assumed you were talking about the three-piece spoiler until your reply post in which you stated you've never seen another "fin" like yours. From this statement I would guess you have some sort of an aftermarket "fin". Deadbird was dead-on when he said your post was vague. You posted using a term that no one else uses (fins), and the description of the location of your trouble was vague at best (on the side of the car, where the fin wraps around). If you want a good, informative reply, you have to make a good, informative post.
------------------
85 IROC-Z
2,4XX original miles
------------------
85 IROC-Z
2,4XX original miles
Moderator




Joined: Mar 2001
Posts: 14,293
Likes: 195
From: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
pictures pictures pictures...
John
John
TGO Supporter
iTrader: (2)
Joined: Jul 1999
Posts: 13,579
Likes: 9
From: Readsboro, VT
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
The hell with pictures. Telling us what kind of car you have would be a good start! 
------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah

------------------
The IROC Homepage
<A HREF="http://www.rit.edu/~jli4307/camaro" TARGET=_blank>
View the restoration of an 85 IROC</A>
Custom Thirdgen Subwoofer Enclosures
"I didn't know a bored out Ford could go so slow" -Shenandoah
Trending Topics
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
I'm sorry you felt I was being an *** by being honest about the information you gave,, most know I will do what I can to help with an answer & I did what I could to help answer you based on the information givine,, I'm not going to beg for details, I'm sorry if I offended you.
Thread
Thread Starter
Forum
Replies
Last Post





