Cailper,hose install ??
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 77
Likes: 0
From: kentucky
Car: 91 rs
Engine: 3.1 v6
Transmission: 700r4
Cailper,hose install ??
This is probably common sense to u-all but , being new i dont want to screw anything up.
My question is, can i (should i ) assemble my new break hose to the new front caliper off the car, then install to hard line OR do i have to for some reason install the new hose to the hard line first, then install the caliper to it?
Seems like i would loose more fluid doing the later...
Also , do all pads have to be bedded in??
Thanks for your advice...
My question is, can i (should i ) assemble my new break hose to the new front caliper off the car, then install to hard line OR do i have to for some reason install the new hose to the hard line first, then install the caliper to it?
Seems like i would loose more fluid doing the later...
Also , do all pads have to be bedded in??
Thanks for your advice...
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Cailper,hose install ??
You might find it's hard to tighten the banjo bolt with the caliper off the car.
Supreme Member
iTrader: (7)
Joined: Mar 2001
Posts: 6,420
Likes: 5
From: Fort Mill, SC, USA
Car: '88 Iroc, '91 RS, and a '70 RS
Engine: 5.7 TPI; 5.0 TBI; ZZ4/T56 on the ag
Transmission: A4, A4, slated to be a T56
Re: Cailper,hose install ??
If you have a bench vice slide the caliper into it so that wont' turn and install the new hose with a new bolt and crush washers, then install on the car when you can.
Ed
Ed
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
BurlyChev
Tech / General Engine
14
Aug 22, 2015 01:52 PM
