Question about craig moates 2732a adapter (the 29c256 with zif and ip)
Thread Starter
Supreme Member
Joined: Sep 2001
Posts: 1,192
Likes: 2
From: Oklahoma city
Car: 90 irocz
Engine: 350tip
Transmission: 700r4
Question about craig moates 2732a adapter (the 29c256 with zif and ip)
Question about craig moates 2732a adapter (the 29c256 with zif and ip).
Im goignt o be in new jersey in october, and im ogign to have the chance to play with a 870 ecm 305 tpi 85 z28. Id liek to get the 2732 adapter, but id liek to knwo a little more about it,
such as, what exactly is the rotary dip switch for?
How would one stack a bin for the 870 on a 32k chip?
Im goignt o be in new jersey in october, and im ogign to have the chance to play with a 870 ecm 305 tpi 85 z28. Id liek to get the 2732 adapter, but id liek to knwo a little more about it,
such as, what exactly is the rotary dip switch for?
How would one stack a bin for the 870 on a 32k chip?
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Re: Question about craig moates 2732a adapter (the 29c256 with zif and ip)
Originally posted by CustomX
such as, what exactly is the rotary dip switch for?
How would one stack a bin for the 870 on a 32k chip?
such as, what exactly is the rotary dip switch for?
How would one stack a bin for the 870 on a 32k chip?
Just add the bin files together.
I redid my editor so that each table has 8 entries so I can just edit all 8 chips at once.
About 3/4 of the time I just do one bin atta time, and use the first location starting at 0000 and set the switch to 7.
Thread
Thread Starter
Forum
Replies
Last Post
