Where or which table is it that controls the pump shot (amount of fuel) when the throttle is first cracked open. Again MAF 6e code,,,,in tunerpro RT. Thanks, Larry.

 

I found it,,,,boy I am going to drive you guys nuts,,,lol Larry.

 

Well, what was it?

jms

 

It is in tables and listed as
"Accel enrich % bpw vs Asncy pulse" Increasing this number is supposed to give you more pump shot when you crack the throttle.

I also found this one
"# of accel enrich pulse vs engine coolant temp" Increasing this number is supposed to increase the duration of the pump shot. It is also listed in tables right under the pump shot I listed above it.
I haven't had a chance to try them yet, I will give it a wirl tomorrow.
I am sure others on here that are way more experience than me could shed some light on these tables. I am only telling you what I have read, no experimenting with them yet. Hope that helps, Larry.

 

https://www.thirdgen.org/forums/diy-...6e-tip-ae.html

a recent post about this topic. In there I have posted an XDF that has more AE tables than the others I've seen. I took them from the source code, but haven't tested them yet.