pocket programmer
Thread Starter
Member
Joined: Jul 1999
Posts: 156
Likes: 0
From: mn,us
pocket programmer
i now have aquired all the parts to burn proms the pocket programmer,datarase,and 10 27c256 chips to start out all i want to do is burn and read a chip that i have downloaded and changed the injecter constant(using tunercat)and just play with the burner until the snow melts.the ? i have is this
using fileprom i set the chip and select to burn from file then it asks where file is located so i enter file location such as c\mydocuments\first.bin then enter it always says file not found what am i doing wrong?
thanks
pete
------------------
1990 Trans Am,350 TPI(L98),WS6suspension ,bridgestone RE71's /245/45/zr16
paxton supercharger,afr heads, alston sfc's,msd 6AL-BTM,
8.5 superconductor wires SLP 1-3/4 headers,duel cats,3"slp exaust, lakewood LCA's,T.B.Bypass
160 degree stat,alum driveshaft,fiberglass wing, secret mods
"if you cant win fair CHEAT"
using fileprom i set the chip and select to burn from file then it asks where file is located so i enter file location such as c\mydocuments\first.bin then enter it always says file not found what am i doing wrong?
thanks
pete
------------------
1990 Trans Am,350 TPI(L98),WS6suspension ,bridgestone RE71's /245/45/zr16
paxton supercharger,afr heads, alston sfc's,msd 6AL-BTM,
8.5 superconductor wires SLP 1-3/4 headers,duel cats,3"slp exaust, lakewood LCA's,T.B.Bypass
160 degree stat,alum driveshaft,fiberglass wing, secret mods
"if you cant win fair CHEAT"
TGO Supporter
Joined: Jul 1999
Posts: 10,907
Likes: 4
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
The problem is that Pocket Programmer is a DOS program and having problems with the directory name greater than 8 bytes long.
I created a directory called "BINS" within "EPROM" that Pocket Programmer uses.
So I just type \EPROM\BINS\ Exactly like that AND remember to end it with a "\" too or it will think it is a file (For a lot of people it has been a long time since they worked with DOS...or they never have...its a good way to see how old someone is).
Then it will display all the bins in that directory. I just move my bins from my "working directory" to the C:\EPROM\BINS\ directory prior to leaving Windows and restarting in MS-DOS so I can use Pocket Programmer.
I created a directory called "BINS" within "EPROM" that Pocket Programmer uses.
So I just type \EPROM\BINS\ Exactly like that AND remember to end it with a "\" too or it will think it is a file (For a lot of people it has been a long time since they worked with DOS...or they never have...its a good way to see how old someone is).
Then it will display all the bins in that directory. I just move my bins from my "working directory" to the C:\EPROM\BINS\ directory prior to leaving Windows and restarting in MS-DOS so I can use Pocket Programmer.
Thread
Thread Starter
Forum
Replies
Last Post
