Not sure if I'm even asking the right question here -

I was about to start fiddling around for the first time in TunerPro.

In extracting the PROM from its housing, I managed to mangle half the pins and break off 6. Needless to say, I can no longer get any information off of my stock PROM. I already have a bunch of blank PROMs ready to go, but without a source file, obviously I am stuck. Is there anyone who can help me out with a stock profile for an 85 tpi (305 with auto trans)? I think it's called a BIN?

Any help would be greatly appreciated.

- Don

 

You need to know the BCC from your original prom. Go here: https://www.eecis.udel.edu/~davis/z28/ to see if any of the bins match yours.
Download and use at your own risk, as with any programing.

 

It may be against the rules to post about another site- but in the interest of being helpful and sharing where I know there are BINs and XDFs- gearhead-efi forums have an extensive library of BINs.

Like the previous post, you need to make sure you match what broadcast code.

 

gearhead. make sure it is a automatic type .bin.