alternator
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 19
Likes: 0
From: West Virginia
Car: 1986 z28 and 1989 RS v6
Engine: 350 carb and 2.8 MPFI
Transmission: 700r4
alternator
What is the difference between a 2 lead and 1 wire alternator.
The wiring harness on my 86 z28 has a two prong connector.
I have removed the 305 and put in a 350 carb. However, when I check on an alternator for my 350, they recommend a one wire alternator.
can I adapt the two lead wire to the one wire? I know that I will be doing away with all the computer and what it runs, all the smog control and the air conditioner. Just the basic 350.
The wiring harness on my 86 z28 has a two prong connector.
I have removed the 305 and put in a 350 carb. However, when I check on an alternator for my 350, they recommend a one wire alternator.
can I adapt the two lead wire to the one wire? I know that I will be doing away with all the computer and what it runs, all the smog control and the air conditioner. Just the basic 350.
Member
Joined: Dec 2001
Posts: 456
Likes: 4
From: Concordia, MO, USA
Car: 89 Formula, WS6
Engine: LB9/peanut cam :(
Transmission: 700R4
A standard 3 wire alt will give better performance.
Here's a really good read on the subject:
http://www.madelectrical.com/electri...hreewire.shtml
Here's a really good read on the subject:
http://www.madelectrical.com/electri...hreewire.shtml
Thread
Thread Starter
Forum
Replies
Last Post
raymondandretti
Electronics
1
Sep 27, 2015 06:43 PM
