I am getting rid of my cc-distributor and found a non-cc one cheap on the for-sale board but the guy has one without the cap , coil and rotor will my stuff work on it . Are all HEI caps coils and rotors the same .My cap has only the plug from the distributor to the cap , the white tac wire & a pink battery wier in it . If not I am looking for a complete vacuume advance distibutor for my 85 Iroc in good working condition . Thank You .

 

Will my cap work on vaccume advance distributor chevy .

 

If you have the coil-in-cap distributor, your cap, coil and rotor should work. If not, you can pick up new ones at any parts store.

 

Thats what I thought but , I sometimes get after doing a search . I do have the in cap coil and all that stuff is new .
Not that I need to know but how did the distributor communacate
with the ecm with only the tack wire and battery wire lead 85 Iroc came with carb . Thank you very much for your help and you do not have to ansewr that ?

 

Thats what I thought but , I sometimes get after doing a search . I do have the in cap coil and all that stuff is new .
Not that I need to know but how did the distributor communacate
with the ecm with only the tack wire and battery wire lead 85 Iroc came with carb . Thank you very much for your help and you do not have to ansewr that ?

 

Computer controlled distributors had a separate connector for the ECM signals.

 

Then witch one do I have thier is no vacuum advance or separate conector .

 

With no vacuum advance it will be a computer-controlled unit. There will be a 4 pin connector coming out of the base of the distributor for the ECM.

 

I gess I never hook't that up after the motor swap . I am sure its hiden behinde the block some where I can not see . Just wanted to know thank you verey much .