Cables hanging from under hood
06-15-2007, 04:39 AM
#1
Junior Member
Thread Starter
Join Date: Jun 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Cables hanging from under hood
I recently purchased a 92' camaro RS when i opened the hood i noticed ther was a cable hangin from the hood i think it goes to the louvers am not sure wher it goes any help will be greatly appreciated 
06-19-2007, 10:28 AM
#5
Member
Join Date: Mar 2004
Location: Kansas, where the wind howls
Posts: 388
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 Z28 H.O. w/Megasquirt II
Engine: semi-stock L69
Transmission: T-5 non W/C
Axle/Gears: 3.73 open
Re: Cables hanging from under hood
Greatly appreciate our help my ***.
Please, no need to yell when you get an obvious suggestion. You asked for help, here it is. If your not sastisfied, and want to continue to tell us what we do or don't have on our cars, go get a book and figure it out yourself.
That's the ONLY thing that will have an electrical wire actually attached to the hood(from the factory, anyways). If you find some way to attach it to the louvers, let us know.
Please, no need to yell when you get an obvious suggestion. You asked for help, here it is. If your not sastisfied, and want to continue to tell us what we do or don't have on our cars, go get a book and figure it out yourself.
That's the ONLY thing that will have an electrical wire actually attached to the hood(from the factory, anyways). If you find some way to attach it to the louvers, let us know.
Last edited by pizza_guy; 06-19-2007 at 10:32 AM.
06-19-2007, 11:37 PM
#6
Member
iTrader: (1)
Join Date: Oct 2006
Location: Kansas
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Camaro Z28, 88 IROC-Z
Engine: 5.0L TBI., 5.7TPI
Transmission: Auto TH200C, 700R4
Axle/Gears: 3.23 posi, ones that rotate!
Re: Cables hanging from under hood
Does your wires/harness look something like the attachments below
Then you are probably missing the under hood light as JamesC suggested.
Also, take a look on the inside cover of the center console. There should be a list of RPO codes. If one of the codes is U26 then you should have an under hood lamp as shown in the attachments below.
Welcom to TGO
Dave
Then you are probably missing the under hood light as JamesC suggested.Also, take a look on the inside cover of the center console. There should be a list of RPO codes. If one of the codes is U26 then you should have an under hood lamp as shown in the attachments below.
Welcom to TGO
Dave
Last edited by 82CrossFire Z28; 06-19-2007 at 11:47 PM. Reason: Posted the correct pictures
06-20-2007, 01:39 AM
#7
Junior Member
Thread Starter
Join Date: Jun 2007
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cables hanging from under hood
Greatly appreciate our help my ***.
Please, no need to yell when you get an obvious suggestion. You asked for help, here it is. If your not sastisfied, and want to continue to tell us what we do or don't have on our cars, go get a book and figure it out yourself.
That's the ONLY thing that will have an electrical wire actually attached to the hood(from the factory, anyways). If you find some way to attach it to the louvers, let us know.
Please, no need to yell when you get an obvious suggestion. You asked for help, here it is. If your not sastisfied, and want to continue to tell us what we do or don't have on our cars, go get a book and figure it out yourself.
That's the ONLY thing that will have an electrical wire actually attached to the hood(from the factory, anyways). If you find some way to attach it to the louvers, let us know.
Trending Topics
06-23-2007, 01:11 AM
#8
Member
iTrader: (1)
Join Date: Oct 2006
Location: Kansas
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Car: 82 Camaro Z28, 88 IROC-Z
Engine: 5.0L TBI., 5.7TPI
Transmission: Auto TH200C, 700R4
Axle/Gears: 3.23 posi, ones that rotate!
Re: Cables hanging from under hood
LEONELB
Do your "hanging wires" inluded an inline fuse with a connector on the end
See photo below.......
Post a few pics of what you have so we can get it hooked up.
Dave
Do your "hanging wires" inluded an inline fuse with a connector on the end
See photo below.......Post a few pics of what you have so we can get it hooked up.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
3
09-17-2015 03:38 PM
