Wiring up a 6AL with an HEI dizzy
Thread Starter
Member
iTrader: (1)
Joined: Mar 2008
Posts: 183
Likes: 0
From: Port Charlotte, FL
Car: 1986 WS6 TransAm
Engine: THREEFIDDY!
Transmission: T5
Axle/Gears: 3.73
Wiring up a 6AL with an HEI dizzy
Hey guys,
Im doing a decent amount of mods to my 86 T/A (L69 4bbl), one being all MSD ignition. I'm re-using the stock HEI distributor, i bought an MSD rebuild kit for it, and a performance Accel module. Along with an MSD 6AL and wires. I was curious if there's any specific way i should wire the box with the original wiring, Most likely not, i just want to know for sure before i get to installing it.
Thanks alot,
Im doing a decent amount of mods to my 86 T/A (L69 4bbl), one being all MSD ignition. I'm re-using the stock HEI distributor, i bought an MSD rebuild kit for it, and a performance Accel module. Along with an MSD 6AL and wires. I was curious if there's any specific way i should wire the box with the original wiring, Most likely not, i just want to know for sure before i get to installing it.
Thanks alot,
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Re: Wiring up a 6AL with an HEI dizzy
Hey guys,
Im doing a decent amount of mods to my 86 T/A (L69 4bbl), one being all MSD ignition. I'm re-using the stock HEI distributor, i bought an MSD rebuild kit for it, and a performance Accel module. Along with an MSD 6AL and wires. I was curious if there's any specific way i should wire the box with the original wiring, Most likely not, i just want to know for sure before i get to installing it.
Thanks alot,
Im doing a decent amount of mods to my 86 T/A (L69 4bbl), one being all MSD ignition. I'm re-using the stock HEI distributor, i bought an MSD rebuild kit for it, and a performance Accel module. Along with an MSD 6AL and wires. I was curious if there's any specific way i should wire the box with the original wiring, Most likely not, i just want to know for sure before i get to installing it.
Thanks alot,
use the install harness that is sold separately ...
Thread Starter
Member
iTrader: (1)
Joined: Mar 2008
Posts: 183
Likes: 0
From: Port Charlotte, FL
Car: 1986 WS6 TransAm
Engine: THREEFIDDY!
Transmission: T5
Axle/Gears: 3.73
Re: Wiring up a 6AL with an HEI dizzy
Okay, what if i didnt want to spend the money on the install harness because i was a cheap old bastard like that rofl?
No but seriously,
No but seriously,
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Re: Wiring up a 6AL with an HEI dizzy
I just thought it was a cleaner install when I did my 6A install...
Thread Starter
Member
iTrader: (1)
Joined: Mar 2008
Posts: 183
Likes: 0
From: Port Charlotte, FL
Car: 1986 WS6 TransAm
Engine: THREEFIDDY!
Transmission: T5
Axle/Gears: 3.73
Re: Wiring up a 6AL with an HEI dizzy
So does any one know how to do this without the install harness?
Trending Topics
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Re: Wiring up a 6AL with an HEI dizzy
it should have came with a manual illustrating how to install it....
Senior Member
Joined: Feb 2010
Posts: 1,125
Likes: 1
From: San Diego, California
Car: Trailblazer EXT 4.2 (Firebird Form)
Engine: 5.1 4bbl
Transmission: 700R4 Mega Raptor Level 4
Axle/Gears: 2.73
Re: Wiring up a 6AL with an HEI dizzy
http://www.msdignition.com/instructi....pdf?terms=6al
Make sure you have a fire extinguisher near by.... NO JOKE!!! ... BEING SERIOUS..
Make sure you have a fire extinguisher near by.... NO JOKE!!! ... BEING SERIOUS..
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM
