Help please gauge problems!!
Thread Starter
Joined: Mar 2011
Posts: 6,287
Likes: 41
From: Northwest Ohio
Car: 1991 Camaro RS
Engine: Lq4 6.0 SBE s485 turbo E85
Transmission: Fsi th400 stage 4. TSI 5500 st
Axle/Gears: Strange S60 4:10s
Help please gauge problems!!
Ive used the search but had no sucess. The problem is i recently put Leds in the gauge cluster and now the Tach only goes up to 3.5K rpm. It just hangs there when i rev it up. Also the Temp guage doesnt work. Now all of these worked right before i removed the cluster. I made sure every thing was connected good and still no sucess.. Any ideas?? I also removed the individual gauges from the cluster at one point. But i replaced them the same as i took them out. Thanks for any advice the Tach dosent bother me its the Temp Guage that I NEED to fix Pronto!!!
Also its a 1991 camaro 3.1L
Also its a 1991 camaro 3.1L
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Temper Tantrum
With the engine OFF, but the key in the RUN position, ground the sender wire, then look at the temp gage.
What does the gage do when that wire is grounded?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If You’re Passed By Your Own Tire On The Track, It’s Time For A Pit Stop
.
What does the gage do when that wire is grounded?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If You’re Passed By Your Own Tire On The Track, It’s Time For A Pit Stop
.
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM