Help identifying plugs
Thread Starter
Member
Joined: Apr 2005
Posts: 490
Likes: 1
From: Hamilton ON Canada
Car: 87 GTA t-top
Engine: L98 350 w/RMT
Transmission: 700R4
Axle/Gears: 9 bolt BW 3.45
Help identifying plugs
What are these plugs for and is there a link or someone have the diagram for these connections.
Its the main harness that connects to the internal harness, sorry I dont know the name of the connectors.
Its the main harness that connects to the internal harness, sorry I dont know the name of the connectors.
Supreme Member
iTrader: (35)
Joined: Aug 2006
Posts: 1,470
Likes: 1
From: Mississauga,Ont,Canada
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: Help identifying plugs
The first picture looks like the connectors ( Black Ones ) for the harness to the rear which is the C208. The white one I think is for cruise control
Second pic the clear one looks like the plug that goes behind the gauges, C1 I think. the grey one might be for the antenna relay
Its hard to guess what they are without knowing where they are located in the car
Second pic the clear one looks like the plug that goes behind the gauges, C1 I think. the grey one might be for the antenna relay
Its hard to guess what they are without knowing where they are located in the car
Joined: Aug 1999
Posts: 5,266
Likes: 463
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Help identifying plugs
Picture 1 shows the dash harness BLACK C207 connector,...... I forgot what the WHITE one is for ( Fuel Injection ?)
Picture 2 shows The ECM harness C207 Connector. I forgot what the GREY one is for ( Fuel injection ?)
You might have already guessed,..... the WHITE plugs in pic 2 connect into the BLACK plugs in pic 1. AND The GREY plug in pic 2 connects to the WHITE plug in pic 1. VERY common for these plugs to be disconnected after a Carb swap.
The round connector in pic 3 is for the oil pressure gauge. I'm not sure about the BLACK 2 pin plug,.......... maybe to the wiper motor ?
Picture 2 shows The ECM harness C207 Connector. I forgot what the GREY one is for ( Fuel injection ?)
You might have already guessed,..... the WHITE plugs in pic 2 connect into the BLACK plugs in pic 1. AND The GREY plug in pic 2 connects to the WHITE plug in pic 1. VERY common for these plugs to be disconnected after a Carb swap.
The round connector in pic 3 is for the oil pressure gauge. I'm not sure about the BLACK 2 pin plug,.......... maybe to the wiper motor ?
Thread
Thread Starter
Forum
Replies
Last Post
Linson
Auto Detailing and Appearance
26
Sep 21, 2015 01:08 PM
89 formula TPI
Tech / General Engine
10
Sep 7, 2015 11:06 AM
