hot wire when key is turned on
Thread Starter
Member
Joined: Jun 2014
Posts: 393
Likes: 2
From: Montana
Car: 1986 Trans AM WS6
Engine: 383 Vortec TPI, PUTS SMILES ON FACE
Transmission: PATC LVL 3 Raptor Transmission
Axle/Gears: 3.27 POSI 9 BOLT
hot wire when key is turned on
Was trying to find what wire is soot to splice into that is hot when I turn the key? 1986 trans am
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: hot wire when key is turned on
That's quite vague. Any wire is safe to splice, the problem is, what are you adding to the circuit ? If what your adding is to big a draw on the circuit, you'll just pop fuses or smoke the wiring.
This should help...
http://www.austinthirdgen.org/?pid=19
This should help...
http://www.austinthirdgen.org/?pid=19
Thread Starter
Member
Joined: Jun 2014
Posts: 393
Likes: 2
From: Montana
Car: 1986 Trans AM WS6
Engine: 383 Vortec TPI, PUTS SMILES ON FACE
Transmission: PATC LVL 3 Raptor Transmission
Axle/Gears: 3.27 POSI 9 BOLT
Re: hot wire when key is turned on
It is for a guage... I need it turned on when the car is on but off when the car is off.
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: hot wire when key is turned on
Gages, radio, wiper, htr a/c, c/h fan, turn b/u fuses are all ign switched
If you look at fuse panel, there's a empty terminal labeled ign, you can stick a male spade terminal in as well iirc
If you look at fuse panel, there's a empty terminal labeled ign, you can stick a male spade terminal in as well iirc
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
10
Aug 11, 2015 10:11 PM
