I've been trying to figure out how to solve a problem with the washer signal. I tested the pink wire with the selector being turned to "mist" and get nothing when I measure the voltage from the wiper motor connector. However, I get a 12v when measuring it from inside the car on the connector above the steering column. It seems like it is passing through the fusebox, but I dont see any fuses that are blown nor a separate fuse for the washer motor. I'm thinking there is a break somewhere along its route, since I get nothing from the connector on the other side of the firewall. Should I just cut it and wire it directly to the connector of the wiper motor?
Update:
Sorry, was too quick to post. The wire was broken coming out of the c100 connector. Soldered it back and now it gets the 12v.