for any of you old school engine guys this is going to sound like a 100% newbie question. I'm not new to engines or to installing them but this is my 1st fuel injection swap. i pulled the factory 305 TBI engine and installed a fairly stout 383 with a first TPI intake. I removed all the wires i believe i no longer need from the bulkhead fitting. I'm at the stage were I'm ready to start routing the remaining wires and hooking them up to the engine. what i would like to have is a schematic of some sort showing where each wire from the bulkhead goes. I'm unable to locate one. i have the repair manual and honestly i don't care for the schematics in it. does anyone know where i can find something like that? any help would be appreciated.

 

Camaro Firebird C100 Firewall Plug Fuse Box

This is what I used when I LS swapped my Formula.

 

https://www.thirdgen.org/forums/ltx-...p-3rd-gen.html
https://www.thirdgen.org/forums/ltx-...formation.html
https://www.thirdgen.org/forums/ltx-...-diagrams.html