FS: Roller 87' 305 in WI
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 216
Likes: 1
From: Southeastern Wisconsin
Transmission: Automatic!
FS: Roller 87' 305 in WI - $50!
Pulled this weekend, ran very nice, just swapped in a 350 for more power 
. 118k miles, stock heads, L98 cam with factory roller parts. Heads are off the car to help transporting of the engine...no timing chain but otherwise complete longblock. Very clean, well maintained.
*Edit- Removed roller parts and cam. Shortblock and heads to the first $50. Can help deliver too, within reasonable distance. MUST GO.
Roller parts and cam are available for a slightly higher price.
. 118k miles, stock heads, L98 cam with factory roller parts. Heads are off the car to help transporting of the engine...no timing chain but otherwise complete longblock. Very clean, well maintained. *Edit- Removed roller parts and cam. Shortblock and heads to the first $50. Can help deliver too, within reasonable distance. MUST GO.
Roller parts and cam are available for a slightly higher price.
Last edited by TPIMonteLS; Jun 13, 2006 at 06:35 PM.
Trending Topics
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 216
Likes: 1
From: Southeastern Wisconsin
Transmission: Automatic!
TTT
Nobody wants it? Even for $50? Thing ran fine and is in good shape. If nobody takes it I will end up taking it apart to help the ease of moving it around.
Nobody wants it? Even for $50? Thing ran fine and is in good shape. If nobody takes it I will end up taking it apart to help the ease of moving it around.
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 216
Likes: 1
From: Southeastern Wisconsin
Transmission: Automatic!
TTT
Block is now taken apart but all there and in great shape. Removed the crank and pistons for easier moving around(don't have a hoist). Heads go with it.
Block is now taken apart but all there and in great shape. Removed the crank and pistons for easier moving around(don't have a hoist). Heads go with it.
Junior Member
Joined: Jun 2006
Posts: 37
Likes: 0
From: Knoxville Tennessee
Car: 1996 Ford F-150
Engine: 300cid I-6
Transmission: Berg Warner M45
Axle/Gears: Ford 9" 2.89:1
God damn it!!!! I need a assembled short block... Why the hell did you just not get one of your kids little red wagons or a wheels barrow to move it around??
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 216
Likes: 1
From: Southeastern Wisconsin
Transmission: Automatic!
If I had kids I would of surely had them move it around, or I could go create some children but it might be awhile before they could move it....
Seriously though, I had the shortblock complete for about week without any buying, so it was time to lighten the load so I can drive my car without it sagging in the rear. Its all there, pretty simple to re-assemble
.
Seriously though, I had the shortblock complete for about week without any buying, so it was time to lighten the load so I can drive my car without it sagging in the rear. Its all there, pretty simple to re-assemble
. 
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 216
Likes: 1
From: Southeastern Wisconsin
Transmission: Automatic!
Was in the trunk, finally got it out 
.
Its in peices, I'd assume someone would rebuild it anyways...but hey, its only $50, for a good roller block and everything needed to get it back together as a longblock, thats not too bad, IMO.
.Its in peices, I'd assume someone would rebuild it anyways...but hey, its only $50, for a good roller block and everything needed to get it back together as a longblock, thats not too bad, IMO.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM