Hi all, I’m reposting my head because I still have not found a buyer for them yet.
Like I said before I bought some aluminum Corvette heads and are going to use them instead.
I also have a TBI to Vortec heads intake that a bought because I was unsure if I was going to get the corvette heads….$$$.... O well
<o =""></o>
These are a set of Pro Topline Heads, completely assembled, for a small block Chevy. They have been completely remaned by and ASE master machinist. They have been baked at 625 degrees and shot peened. Following that they have been magnufluxed to ensure they are no cracks, none found. Then the studs were installed. Both gaskets surfaces have been milled to ensure proper sealing, the intake only had .004 taken off. The valve guides were then reamed .015OS and the seats were cut with a three angle cutter. The firedeck has been milled .012. the heads were then washed and assembled. The valves are 1.94 and 1.50, they have dyno time on the valves only. The springs are new as are the retainers and the locks, they are .030 higher Comp. than factory. The valves seals are Vitron umbrellas. The chamber CCS are around 68 and I am insure of the runners, I believe they are 180 but not positive
<o =""></o>
Like before I just what to get what I paid for them because I have not even touch them.
$500 + shipping $40 - $70 Contact me for quote.
<o =""></o>
<o =""></o>
GM Performance Parts TBI to VORTEC Intake Manifold 275 + shipping $20 - $40 Contact me for quote
<o =""></o>
<o =""></o>
Or I will sell both together for $750 + shipping
<o =""></o>
I have posted pictures this time for buyers confidences
<o =""></o>
The items are still in the boxes they came in so shipping will be quick.
<o =""></o>
PM me
Or contact me by e-mail at jnreilly@sbcglobal.net
<o =""></o>
Let me know,
I would like to get rid of these fast,
but not to the point of price negotiation.
Please serious buyers only.
<o =""></o>
Thanks, JR

 

TBI intake still in bubble wrap

 

Pictures in intake from the guy I bought in from
just check the numbers in the pictures.

Thanks, JR

 

I know you said you don't want to negotiate, but $275 shipped on the intake?

 

Sent you a PM Fast355.

Bump for today, Anyone else?


JR

 

Everything is still for sale.


ANYONE?

 

TTT

 

TTT

 

what are the castings on the topline heads? #'s