I have a 92 camaro that I'm parting out.

• Rebuilt 4 bolt mains 350 TPI Eng, mild cam less than 6,000 miles, $1,500.00 with the computer and wiring if needed. Runs Good

• Complete Moser 12 bolt rear, with 3:73 posi, 33 spline axles, Willwood Disc Brakes, Tubular lower control arms. (cost new - 3,000) $1,500.00

• Complete Body in good shape : No rot or dents Make offer on anything. Power windows.

• Complete Black Interior Good Shape - Make offers (Dash pad is cracked at outter corner driver side.

• Lowering Springs (I think like 1.5") Low Miles $100.00

• Larger than stock front stabilizer bar (not sure the diameter) - Make offer

• Shock Tower Cross Brace (Edelbrock) Make Offer

• Anytrhing else you may need that I didn't list please ask,

The Car is in Hamden CT.
I can be reached @203-395-75976 before 8PM Please!

 

I am looking for the entire ground effects kit with front and rear covers if you have it.

Thanks , Will

 

Its all there and in good shape. Minor scuffing on the lower front cover. Make me an offer. I'm not looking to get rich on this stuff. I don't know what parts for these cars go for. I just bought it for the 5 speed. I can try and get pics for you at the end of the week if you want.
Fran
----------
I also forgot to mention in my original post, It has a stainless steel Borla exhaust system (sounds sweet) not too loud. And It has headers too. Also has a cat.

Whole system, 300.00

 

pm sent

 

interested in the 12 bolt rear, sent you a PM

 

did you use the whole 5 speed system? because if you don't want the reservoir, master/slave cylinders, and the hoses for them, I'll take those.

 

also interested in the 12 bolt - can you send pics to crazynights22000@yahoo.com

Also is the T/A on this 12 bolt?

 

You interested in selling just the TPI/Computer and harness?

I dont need anything from the heads down -- Just the TPI system.

 

Not sure I understand your question.....T/A???? It is a complete 12 bolt rear from Moser. Posi w/ 3:73 gears. Hope this answers your question. Fran
----------
88305tpiT/A, I'd be willing to sell you what you want if I dont get any takers quickly on the whole eng. Make me an offer. Thanks Fran

 

I'm looking for both driver and passenger side glass trim. The part that acts like a wiper on the outside of the side glass. I can take pictures of mine if you need clarification.

 

I'm interested in the longblock if 88305tpiT/A wants the TPI system. I just need to know the complete specs on it and what you're looking to get for it. Please PM me back with the info....I sent you a PM before on the ground effects too.

 

What brand are the springs?

 

I am VERY interested in the driveside door. PLEASE respond quickly. Power if possible. If the one you have, has no rust, I am in. Little dings are OK.

I live neer Boston and can drive down on Sat. to grab the door. Please let me know soon. Thanks.

 

wondering if you have the 5 spd shifter boot and trim piece that go on the center console. If you could send pics that would help (WildJoker107@aol.com)\Thanks

Chris

 

Okay lets see if I can answer all the questions.....I'm going to the garage tomorrow afternoon and I will have the receipts for all parts bought for this car. I will try to take pics of it too. The door is for sale and it is power. Good shape, no rot or dents. I will double check tomorrow. Shifter boot I need to keep for my project......Sorry! The Springs I'm not sure of the brand, but hopefully I will have that info tomorrow when I pick up the receipts. I did drive the car a couple hundred miles to and from a swap meet and it rode pretty good. They are red in color if I remember correctly. But I will try to find out for you. The side glass trim I'd like to sell with the doors....sorry!The Long block I will know more about tommorow. I do believe if memory serves me (HA)! its a 1999 4 bolt block 030 bore, cast piston, mild cam stock heads (I think) Runs good. Hope this helps. I plan to be at the garage working on this Sat. Its in Hamden CT and feel free to call my cell# 203-395-7596 (Before 8PM please)
----------
I need to keep the hydraulic stuff for my project....Sorry!

 

FYI The car is in running condition at the momet in caase anyone wanted to see it run/drive. It probably wont be after Saturday though!! I will however, wait to strip anything off of it that would prevent it from running if someone wants to see it run. Thanks, Fran

 

what do you mean "1999 4 bolt block 030 bore, cast piston, mild cam stock heads (I think) Runs good"

I thought it was a 92?

 

The car is a 92 but I was told by my brother in law (the previous owners father) the engine was a 99. That could be wrong, I should know tomorrow when I pick up all the receipts.

Sorry for the confusion. Fran.

 

If the motor is a 99 thats an LS1.

An LS1 doesnt have a TPI.

Post a picture of the motor and then well talk.

 

Its definetly not an LS1. Its a rebuilt 5.7 Tuned Port Injected engine.
Sorry for the confusion and thanks for the education!
Fran.

 

How much you want for the door?

 

Door - $75.00 fair enough??

 

Funny story. Turns out a guy replied to my older thread regarding the door. I got lucky enough for him to be driving by my body guys place today and he is droping off a door. I paid $10 more, but now I don't have to drive 1.5 hours and loose time after work. Anyways, Thanks for the offer and sorry for wasting your time. Good luck selling the rest of the stuff on the car.

 

Guy's The car is still all intact, I haven't sold anything yet. I do have the receipts now so I can look up details for anyone interested Please call my cell phone for questions.......My wife is standing right behind me, waiting to get on the computer! LOL. Thanks, Fran
----------
Oh yeah, the phone number once again is: 203-395-7596.