800.00 plus shipping

I have some:

200cc Dart Platinum Iron Eagle Heads 64cc combustion chambers 2.02/1.60 swirl polished valves, with comp cams flat guide plates, 3/8 arp screw in rockers studs, Comp Cams 987 Springs good to .620 lift. There are CNC Motorsports 1.5 Aluminum Full Roller Rockers on the heads now that can go with.

These are the heads i used to make 330rwhp and 360rwtq in my car with a 700r4 and a STOCK throttle body. I had these on the car for 1 summer and about 2000 miles or so. They are painted with 2 coats of primer and 4 coats of gloss black then sprayed with 4 coats of clear useing all duplicolor ceramic engine paint, and are still on the car. Im kinda gauging interest since im looking to go with a new set. I bought the heads for 1000.00 even shipped to my door brand new and the roller rockers were 170.00 shipped.


These heads were on a N/A LOW compression motor with NO TRACK TIME what so ever just daily driving street time and 4 pulls on a dyno jet. So these heads have not been abused in anyway and are in great condition.

 

All offers will be considered.

BUMP

 

Im looking to sell these still is anyone interested?

 

just fyi, that price is a bit high. you can pick up those same cylinder heads for ~$800 brand new. i'd be asking a bit less than that. maybe $800 for the heads and roller rockers. once you use a product, the value depreciates alot more than people try to sell things for. then when it doesn't sell, they get frustrated. just tryin to help ya out.

on a side note, my pops is using the older version of these heads straight outta the box with 10.5:1 c/r and a big solid cam and is putting down nearly 550fwhp, so they have serious potential.

 

lowered price.
----------
below is a link to similar heads for 810.00 shipped WITH OUT roller rockers.

http://cgi.ebay.com/ebaymotors/Dart-...QQcmdZViewItem

with lowered price and extra parts included this is a deal.

 

Would be willing to trade partially for some 1.6 ratio full roller rockers.

 

I have some brand new proform full roller 1.6 rockers 3/8 studs. If your willing to trade. How much with the trade are you looking for.

 

i would be willing to take 100 bucks off toward the heads for those but i was actually kinda hopeing to find a set of 7/16ths stud roller rockers.

 

BUMPO!