Ok I still have this block,crank,rods&pistons. If anybody wants this just let me know. I would like to trade for a demon or holley carb. I will trade for just about any performance part. Here are the pics!

 

And a couple more.

 

Man every 400 I find is way too far, lol.

 

I have a set of Pro Topline "083" heads...complete and ready to bolt on or would be interested in just buyin it outright could you possibly meet me part way???

 

I would be willing to trade you for the heads. Where would you want to meet?

 

Just want to be clear about the heads...they do have a few passes on them(about 50 or so) they have stainless valves, springs for solid flat tappet or hyd roller(135 seat pressure and good to .560 lift), and have been gasket matched with the bowls cleaned up. My little 327 ran 12.60's at 107 with them on. They are still fresh and ready to go. Only reason I am parting with them is I have Iron Eagles on my current 355 and a set of Pro 1's already for when I build a 400.

I Mapquested the drive and it looks like about 8 hrs or so....could you maybe meet me up 81 a bit??? If you could take a coupla hours off my drive that would be great.

For some reason the pics on the site won't blow up.....What is the casting number on the block??

You can email me at DWS6967@aol.com if ya like

 

I could meet you somewhere on 81 just let me know where. The casting number. This is the 3951509 casting 2 bolt blocks. The 509 and 511 casting were the stronger of the 400 blocks. This is a standard bore block so you have plenty of room to work. Just let me know what you wanna do. If you need anymore pics just let me know.
----------
The block was checked right before I got it and everything checked fine. It only needs to be honed if you wanna go with the standard bore and you will want to polish the crank. If you have any questions just let me know.

 

I believe Roanoke VA is about halfway for you both. If you meet up let me know so I can see the block I coulda bought, then maybe I can buy it if this other guy backs out :-p

 

Would sunday work for you? I sent you a PM with my phone number gimme a call if ya alike and we can work out the details