{FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on parts!
06-26-2007, 09:48 AM
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
{FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on parts!
Stealthram intake with fuel rails and adjustable fuel pressure regulator. No injectors, sensors, or throttlebody. $430 SHIPPED!!!!!!!!!!!!!!!!!!!!!
GM Bowtie 1.6 Full Roller Aluminum Roller Rockers. Self-Aligning $215 SHIPPED!
Comp Cams CC306 camshaft. 230/244 (lift @ 0.050") .510"/.540" w 1.5 Rockers (not included - just for specs). $160 SHIPPED!
All items have less than 3000 miles on them. Ready to be shipped. I removed everything 2 weekends ago. Going more radical with a carb'd setup and no computer controlled equipment.
Shipping will be via FEDEX ground with a tracking number provided.
Paypal accepted, as long as the 3.1% fee is picked up by the buyer.
PM me if you have any questions @ all.
GM Bowtie 1.6 Full Roller Aluminum Roller Rockers. Self-Aligning $215 SHIPPED!
Comp Cams CC306 camshaft. 230/244 (lift @ 0.050") .510"/.540" w 1.5 Rockers (not included - just for specs). $160 SHIPPED!
All items have less than 3000 miles on them. Ready to be shipped. I removed everything 2 weekends ago. Going more radical with a carb'd setup and no computer controlled equipment.
Shipping will be via FEDEX ground with a tracking number provided.
Paypal accepted, as long as the 3.1% fee is picked up by the buyer.
PM me if you have any questions @ all.
Last edited by chevyengr; 07-09-2007 at 07:48 AM. Reason: Adjusted prices and shipping!
06-26-2007, 05:53 PM
#2
Member
Join Date: Jun 2002
Location: Alice, TX
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Pontiac GTA Trans Am
Engine: T.P.I. 383 Stroker
Transmission: Monster 700R4
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
ill trade a hole shot 2400 stall convertor with about 50 miles on it and some cash if interested , i am also in south texas
06-27-2007, 07:21 AM
#3
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Trade what for what? I really need to get rid of parts that I am no longer going to use. What is the T/C for ( trans type)? Just curious.
06-27-2007, 02:19 PM
#4
Member
Join Date: Jun 2002
Location: Alice, TX
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Pontiac GTA Trans Am
Engine: T.P.I. 383 Stroker
Transmission: Monster 700R4
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
its a b&m holeshot 2400 for a 700r4 , i want to trade for the intake
06-27-2007, 02:53 PM
#5
Supreme Member
iTrader: (2)
Join Date: Nov 1999
Location: Monroe,NC
Posts: 1,779
Likes: 0
Received 20 Likes
on
15 Posts
Car: 90 Formula
Engine: 305
Transmission: 700R4
Axle/Gears: 9 bolt/3.27
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Will the roller rockers clear stock valve covers?
06-28-2007, 07:05 AM
#6
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Sure will. 1.6 ratio, 3/8 stud, full roller, Self-aligning.
These will fit perfect under stock valve covers.
Complete set with poly locks and all. Nothing missing --- except a new owner.
Tell u what--- I'll sell them for $225 SHIPPED!!!!
CAMSHAFT TOO! $180 SHIPPED!!!!!!
06-28-2007, 11:08 AM
#7
Member
Join Date: Jun 2002
Location: Alice, TX
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Pontiac GTA Trans Am
Engine: T.P.I. 383 Stroker
Transmission: Monster 700R4
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
so do you wanna trade or not ill give you the t/c and 175$
Trending Topics
06-28-2007, 10:33 PM
#9
Junior Member
Join Date: Dec 2006
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
hi there chevyengr,
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
06-29-2007, 09:01 PM
#10
Junior Member
Join Date: Dec 2006
Location: MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
hi there chevyengr,
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
07-02-2007, 09:56 AM
#11
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
hi there chevyengr,
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
i will buy the stealth ram of ya for $ 380.00 !
how old is the intake please?
does the stealth ram fit L98 vette engine ok?
does the thermostat housing come with it please?
do you have any fuel line fittings at all with it also?
please email me at sxy_corvette@hotmail.com
or ring 613 9701 3383
thanks
glen
I will take an actual picture of the intake this afternoon and send it off to you.
Thanks!
07-02-2007, 10:16 AM
#12
Banned
Join Date: Jan 2007
Location: NYTHIRDGEN
Posts: 1,088
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 T/A
Engine: PROCHARGED LB9
Transmission: FB BUILT 700r4 2200 stall
Axle/Gears: 10 BOLT EATON 3:73 POSI
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
how will that cam and the rockers work in my 89 lb9?
07-02-2007, 11:03 AM
#13
Supreme Member
iTrader: (7)
Join Date: Mar 2005
Location: mid GA
Posts: 1,926
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
im interested in that intake setup... what sensors are needed?
07-02-2007, 11:24 AM
#14
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
You use all the stock sensors from your TPI setup. IAT, MAP, TP, etc. No additional sensors are needed other than your stock ones.
I've got several people interested in the intake. I will give those that PM'd me and posted first their appropriate chance.
As of now, no one has commited to the intake or made requests to pay for it. Plus I need to figure shipping on the intake to those interested. The cam and rockers will be shipped free of charge.
----------
I figure they would be a little radical for a 305 but with the proper springs and pushrods --- along with a custom chip, you can run them safely.
Should sound MEAN!!!!
I've got several people interested in the intake. I will give those that PM'd me and posted first their appropriate chance.
As of now, no one has commited to the intake or made requests to pay for it. Plus I need to figure shipping on the intake to those interested. The cam and rockers will be shipped free of charge.
----------
I figure they would be a little radical for a 305 but with the proper springs and pushrods --- along with a custom chip, you can run them safely.
Should sound MEAN!!!!
Last edited by chevyengr; 07-02-2007 at 11:26 AM. Reason: Automerged Doublepost
07-02-2007, 01:33 PM
#15
Supreme Member
iTrader: (7)
Join Date: Mar 2005
Location: mid GA
Posts: 1,926
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
You use all the stock sensors from your TPI setup. IAT, MAP, TP, etc. No additional sensors are needed other than your stock ones.
I've got several people interested in the intake. I will give those that PM'd me and posted first their appropriate chance.
As of now, no one has commited to the intake or made requests to pay for it. Plus I need to figure shipping on the intake to those interested. The cam and rockers will be shipped free of charge.
----------
I figure they would be a little radical for a 305 but with the proper springs and pushrods --- along with a custom chip, you can run them safely.
Should sound MEAN!!!!
I've got several people interested in the intake. I will give those that PM'd me and posted first their appropriate chance.
As of now, no one has commited to the intake or made requests to pay for it. Plus I need to figure shipping on the intake to those interested. The cam and rockers will be shipped free of charge.
----------
I figure they would be a little radical for a 305 but with the proper springs and pushrods --- along with a custom chip, you can run them safely.
Should sound MEAN!!!!
07-02-2007, 01:53 PM
#16
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Comment to Price: Ha! My brother, you missed out on some details. Here you go:
Stealthram Intake:http://store.summitracing.com/partde...5&autoview=sku $309.95
Stealthram Required Fuel Rails with Adjustable Fuel Pressure Regulator: http://store.summitracing.com/partde...rt=HLY-534-186 $229.95
Total is : $539.90 + Shipping and Handling = Approx $560!!!
I figure this is a DEAL on my behalf.
07-03-2007, 12:12 AM
#18
Supreme Member
iTrader: (7)
Join Date: Mar 2005
Location: mid GA
Posts: 1,926
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Answer to question: Yes. You might have to grind a bit immediately above your throttle body location. Nothing major.
Comment to Price: Ha! My brother, you missed out on some details. Here you go:
Stealthram Intake:http://store.summitracing.com/partde...5&autoview=sku $309.95
Stealthram Required Fuel Rails with Adjustable Fuel Pressure Regulator: http://store.summitracing.com/partde...rt=HLY-534-186 $229.95
Total is : $539.90 + Shipping and Handling = Approx $560!!!
I figure this is a DEAL on my behalf.
Comment to Price: Ha! My brother, you missed out on some details. Here you go:
Stealthram Intake:http://store.summitracing.com/partde...5&autoview=sku $309.95
Stealthram Required Fuel Rails with Adjustable Fuel Pressure Regulator: http://store.summitracing.com/partde...rt=HLY-534-186 $229.95
Total is : $539.90 + Shipping and Handling = Approx $560!!!
I figure this is a DEAL on my behalf.
07-03-2007, 07:05 AM
#19
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Pictures taken last night:
07-09-2007, 07:49 AM
#20
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
Prices Adjusted! Need to clear my garage's shelf and pass on the savings to you guys!
Pay today, I'll ship tomorrow! Guaranteed!!!!
Pay today, I'll ship tomorrow! Guaranteed!!!!
07-09-2007, 11:59 PM
#21
Member
iTrader: (4)
Join Date: Sep 2003
Location: Miami FL
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Iroc-Z and 1985 Z28
Engine: Mild TT 355 and Built 383 Superchar
Transmission: Manual
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
whats the new price on stealth ram? Cash in hand. Paypal verified.
07-10-2007, 07:08 AM
#22
Junior Member
Thread Starter
iTrader: (1)
Join Date: Oct 2002
Location: South Tx 78562
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 IROC-Z 350Stealthram 11.61@120
Engine: 350 Stock Bore&Stroke
Transmission: 700R4 Auto/Vigilante 2600
Axle/Gears: 3.42 Stock 10 bolt
Re: {FS:TX}Stealthram Intake/fuel rails, GM 1.6 SA Rockers, CC306 Camshaft. 3K on par
I had it at $400 plus actual shipping. I changed it yesterday to $430 shipped. What I'll let it go for today is $425 shipped (plus paypal fees if using Paypal--- or just make it $435 total!!!!!!!!!!!!!!).
Thread
Thread Starter
Forum
Replies
Last Post
UltRoadWarrior9
Tech / General Engine
336
04-28-2020 10:39 PM
TX-SleeperC5
Engine/Drivetrain/Suspension Parts for Sale
1
09-24-2015 03:13 PM