Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
I am cleanin out the garage to make room for the new toy!
$250 OBO ~ 350 camel back heads. 1.94 64 cc. 3890462 (info from MorTec
3890462....66-67...302/327/350..Camel hump,no accessory holes,64cc chamber)
$600 OBO ~ 010 short block, steel crank, forged rods, KB Hyper pistons. Rotating assembly is very lightweight. It was built to spin to 7500 RPM all day. It was in a circle track car with 4 races on it. Then they changed to letting them, only have crate engines. It has a wicked cam in it right now, I would think you want to change it, I do not have the specs on it though. This short block coupled with camel backs put 420 hp at the flywheel.
$25 ~ Drum brake rear end out of my '85 Z. Stock gearing. No issues with it, just have a 4.10 posi with disk brakes that I am putting in.
$400 OBO ~ Fresh 700r4 with upgraded front pump. Tailshaft for a third gen f-body. (30 spline)
$SOLD ~ 10 lb NOS brand Nitrous bottle FULL. If I ship it will be emptied.
$275 OBO ~ NOS carbed nitrous kit... https://www.thirdgen.org/forums/engi...it-carbed.html
I am on here all day, so responses should be quick. Most parts are still in/on the car. I am ready to take it apart anytime.
Feel free to make trade + $$ or whatever will make it equal offers.
Here is a list of items I need;
I need at least an 800 cfm carb,
mufflers (flowmaster 40 series)
driveline (just waiting until the th350 is in)
safety loop
tires (slicks)
inline fuel pump and fuel pressure regulator
Thanks guys!
Let me know!
$250 OBO ~ 350 camel back heads. 1.94 64 cc. 3890462 (info from MorTec
3890462....66-67...302/327/350..Camel hump,no accessory holes,64cc chamber)
$600 OBO ~ 010 short block, steel crank, forged rods, KB Hyper pistons. Rotating assembly is very lightweight. It was built to spin to 7500 RPM all day. It was in a circle track car with 4 races on it. Then they changed to letting them, only have crate engines. It has a wicked cam in it right now, I would think you want to change it, I do not have the specs on it though. This short block coupled with camel backs put 420 hp at the flywheel.
$25 ~ Drum brake rear end out of my '85 Z. Stock gearing. No issues with it, just have a 4.10 posi with disk brakes that I am putting in.
$400 OBO ~ Fresh 700r4 with upgraded front pump. Tailshaft for a third gen f-body. (30 spline)
$SOLD ~ 10 lb NOS brand Nitrous bottle FULL. If I ship it will be emptied.
$275 OBO ~ NOS carbed nitrous kit... https://www.thirdgen.org/forums/engi...it-carbed.html
I am on here all day, so responses should be quick. Most parts are still in/on the car. I am ready to take it apart anytime.
Feel free to make trade + $$ or whatever will make it equal offers.
Here is a list of items I need;
I need at least an 800 cfm carb,
mufflers (flowmaster 40 series)
driveline (just waiting until the th350 is in)
safety loop
tires (slicks)
inline fuel pump and fuel pressure regulator
Thanks guys!
Let me know!
Last edited by MemoryRacing; Aug 20, 2007 at 03:49 PM.
Joined: May 2003
Posts: 712
Likes: 8
From: Elyria, Ohio
Car: 82 Z-28
Engine: Built 406ci
Transmission: 700R4 w/3000 stall
Axle/Gears: 3.73 Torsen Posi, Moser Axles
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
Is that convertor lockup style with 30 spline input shaft? Thanks..
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
Joined: Apr 2006
Posts: 1,534
Likes: 3
From: Jacksonville, NC
Car: 92 Camaro
Engine: Dart SHP 406 HSR, LE heads
Transmission: Performabuilt Level 2, Vig 3200
Axle/Gears: S60 373
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
how much for the converter shipped ot 22554 virginia?
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Trending Topics
Senior Member
Joined: Aug 2005
Posts: 767
Likes: 0
From: Connecticut
Car: 2005 Lincoln LS, 83' Z28
Engine: 242 DOHC and an empty engine bay.
Transmission: 5R55S, T5 soon to be auto
Axle/Gears: 3.58s and soon to be 4.10s
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
Any pics of the heads?? 150$$??
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Junior Member
iTrader: (3)
Joined: Apr 2007
Posts: 60
Likes: 0
From: Southern WI
Car: 85 camaro Z28
Engine: 305
Transmission: 700R4
Axle/Gears: Stock
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
pic of tranny and shipping cost to 53511. Thank you
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Junior Member
iTrader: (2)
Joined: Jan 2007
Posts: 15
Likes: 0
From: NE Ohio
Car: 86 Monte Carlo SS
Engine: SBC350
Transmission: TH350
Axle/Gears: 3.73
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
pics of the heads? mark0207@neo.rr.com
Thread Starter
Member
iTrader: (2)
Joined: May 2007
Posts: 101
Likes: 0
From: WVC, UTAH
Car: 85 Z28
Engine: 5.7
Transmission: 700R4
Axle/Gears: 4.11 10 bolt
Re: Camel back heads, engines, fresh 700r4 Hughes stall, TRADES
pics of the heads? mark0207@neo.rr.com
Thread
Thread Starter
Forum
Replies
Last Post
