i got a pair of the aluminum L98 corvette heads (bare) and tpi upper and lower intake with runners make me some offers
i was looking to get at least 250 for the heads but make me an offer
i also have aluminum roller rockers that im not sure if im getting rid of but if i am ill throw them in with the heads but ill let you guys know about that

edit: posting pics

 

Send pics??? I'll PM you my info

 

Pm sent

 

sale on heads is pending,
still got the corvette tpi upper and lower intake with runners
make an offer

 

Do you have the plenum? What year is it from?

 

the heads and intake are off an 88' corvette

 

Sorry, I need a '90-'91 plenum.

 

If the heads don't sale let me know

 

in case the heads haven't sold already:
what type of work has already been done to the heads?
I see there are guideplates and screw in studs installed, are these factory and if so do you still have the hardened pushrods?
What size studs are they?
The rockers are non self aligning or self aligning
Did you run these heads at all and have you had them checked for cracks or warps?
Are these angle plug L98 or straight vette plug heads?

Thanks for the reply

 

The heads are sold. Still have the TPI setup!!!!!

and correct me if im wrong but i looked into it a while back, And i believe that the firebird tpi setups had angled intake bolts? the corvette ones are straight, giving you the ability to use aftermarket heads.

 

I had to pass on the Heads. A huge thanks to TelinskiA for being so patient. MAybe next time...

 

So are the heads available? If so I got money in hand. Let me know.

 

the heads are still for sale the deal fell through.
i decided to up the price to 300 cause thats what i was told they were worth
im not using but I also decided not to just give the rockers away, I want $75 for the rockers and $100 for the tpi set up. oh btw the rockers are harland sharp 1.5's

 

Well Im going to pass on this deal. I got something else planned for my daily driver.

 

hate to hear your first deal fell thru and now you are raising the price on everything
Hope it sells for you

 

$300 is still a good deal for these heads. I would have bought them but I bought a different set when I thought these were sold

Ive seen these heads sell on here for over $600!

Bump for a good deal on a nice set of aluminum heads.

 

PM'd

 

Just fyi..when someone posts 113s for @$600 more than likely they have machine work done for higher lift,ported, magnafluxed for cracks, and are complete. So you cant really compare apples and oranges, but if your selling these with the roller rockers...great deal....anyway free bump!

 

the heads are sold!! for sure this time payment was received

 

Grats on the sale. I had an ad in the WTB section for heads back when I was looking for some. The only offer I got was for a set of stock 113's for $625. So someone got a nice set of heads for a very nice price!

 

bump TPI setup still for sale