SLP Headers, Y-Pipe, and Cat Delete
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jul 2001
Posts: 1,509
Likes: 0
From: Maple Shade, NJ
SLP Headers and Y-Pipe
Edit: I typed cat delete in the title, but didn't remember till after I typed that its going on my friends 88 GTA. Post was edited, and price was lowered. Sorry for that.
Bought off a member here few months ago, I never put them on the car since it was in storage all winter. I'm getting rid of the car all together, unfortunetly. It was hard to find these since SLP no longer makes them.
They were dented to clear the steering shaft, which newer motor mounts that aren't sagging will prevent them from hitting it anyways. And another spot on the other side near the starter area for some reason. I pulled the dents, tig welded them to fill in the low spots, and ground them down smooth. I included a picture of the repaired area. It looks rough but its actually blended in really well. Put them on as is, or get them recoated and you wont tell they were repaired.
I am asking 450 plus shipping. Included hardware. Only thing I don't have is collector bolts which "Home Depot" or "Lowes" will carry. And I think 2 collector donuts, which any autoparts store has. Email: tstrella@comcast.net.
Bought off a member here few months ago, I never put them on the car since it was in storage all winter. I'm getting rid of the car all together, unfortunetly. It was hard to find these since SLP no longer makes them.
They were dented to clear the steering shaft, which newer motor mounts that aren't sagging will prevent them from hitting it anyways. And another spot on the other side near the starter area for some reason. I pulled the dents, tig welded them to fill in the low spots, and ground them down smooth. I included a picture of the repaired area. It looks rough but its actually blended in really well. Put them on as is, or get them recoated and you wont tell they were repaired.
I am asking 450 plus shipping. Included hardware. Only thing I don't have is collector bolts which "Home Depot" or "Lowes" will carry. And I think 2 collector donuts, which any autoparts store has. Email: tstrella@comcast.net.
Last edited by deadtrend1; Mar 13, 2008 at 08:42 PM.
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
Re: SLP Headers and Y-Pipe
Are they 1 5/8 or 1 3/4 headers? And what's shipping to 33603. Thanks. Adam :-)
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jul 2001
Posts: 1,509
Likes: 0
From: Maple Shade, NJ
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
