SLP 1 3/4 Shorties W/Ypipe
Thread Starter
Junior Member
iTrader: (3)
Joined: Jul 2004
Posts: 13
Likes: 0
From: white plains, Maryland
Car: 91 Rs
Engine: 383 hydrolic roller carb
Transmission: T-56
Axle/Gears: 3.73
SLP 1 3/4 Shorties W/Ypipe
I have a Set of 1 3/4" slp headers w/ Y pipe fore sale...these are currently on my car but are about to be removed for longtubes. There are no dents in them....I have seen some ppl dent them to clear the steering box but I didnt have any clearance issues. Will get pics of them in the car tomorrow. Asking $450 shipped
Trending Topics
Thread Starter
Junior Member
iTrader: (3)
Joined: Jul 2004
Posts: 13
Likes: 0
From: white plains, Maryland
Car: 91 Rs
Engine: 383 hydrolic roller carb
Transmission: T-56
Axle/Gears: 3.73
Re: SLP 1 3/4 Shorties W/Ypipe
these headers are going to be off the car tonight and ready to ship out monday....I need these gone...
Want a title? Post!
Joined: Dec 2008
Posts: 0
Likes: 0
Car: 88 TRANS AM GTA
Engine: 355 700R4 3.70 GEARS
Transmission: 1.70 60FT. BEST ET 12.31
Axle/Gears: BEST MPH 113.1
Re: SLP 1 3/4 Shorties W/Ypipe
I'M INTERESTED IN THE HEADERS BUT NOT SO MUCH THE Y-PIPE. I HAD THIS SAME SET AND SOLD THEM FOR A SET OF LONGTUBES. I THINK THE SLP HEADERS FIT WAY BETTER BUT THE Y-PIPE IS TOO SMALL. I ALWAYS THOUGHT THEY WERE DUAL 2 1/2" PIPES INTO A SINGLE 3" BUT AFTER I REMOVED THEM FOR SALE I REALIZED THEY WERE 2 1/4". I KNOW I WOULD HAVE HAD BETTER RESULTS IF THE Y-PIPE WERE BIGGER SO I WAS THINKING I COULD BUILD MY OWN Y-PIPE. WOULD YOU CONSIDER SELLING JUST THE HEADERS? OR WHAT'S THE LOWEST YOU WOULD GO FOR EVERYTHING WITH SHIPPING INCLUDED? ALSO ARE YOU SURE THERE ARE NO DENTS? ON MY SCREEN ON THE #2 CYLINDER HEADER TUBE ON THE PASS HEADER LOOKS LIKE IT HAS A DENT BUT IT MAY JUST BE A STAIN OR DARK SPOT. E-MAIL ME BACK AND I'LL THINK ABOUT WHAT I WANT TO DO. IT'S EITHER THESE OR A SET OF DOUG LONGTUBES. THE LONGTUBES I BOUGHT WERE HEDMAN ELITES AND THEY FIT TERRIBLE. I WOULD NOT RECCOMMEND HEADMANS TO ANYONE. THANKS!!
Thread Starter
Junior Member
iTrader: (3)
Joined: Jul 2004
Posts: 13
Likes: 0
From: white plains, Maryland
Car: 91 Rs
Engine: 383 hydrolic roller carb
Transmission: T-56
Axle/Gears: 3.73
Re: SLP 1 3/4 Shorties W/Ypipe
Sorry the pic looks like there is a dent...it must be an oil spot....I just got the headers off car sunday and took some pics that are posted here. I dont really want to split the setup up but I would for $325 plus shipping without the Y pipe b/c that would cut back on the size for shipping. I'd imagine shipping to be only about $15-$20 for just the headers. pics are coming in a minute
Senior Member
iTrader: (10)
Joined: May 2003
Posts: 785
Likes: 0
From: Tampa, Florida
Car: 1987 Chevrolet Camaro Z28 IROCZ
Engine: L98 350, mini ramed and camed
Transmission: T56 6 speed manual
Axle/Gears: 10 bolt 3:73 limited slip
Re: SLP 1 3/4 Shorties W/Ypipe
If he wants the headers, I might take the y-pipe off your hands. Got any pictures of it? Adam :-)
Thread Starter
Junior Member
iTrader: (3)
Joined: Jul 2004
Posts: 13
Likes: 0
From: white plains, Maryland
Car: 91 Rs
Engine: 383 hydrolic roller carb
Transmission: T-56
Axle/Gears: 3.73
Re: SLP 1 3/4 Shorties W/Ypipe
other than the one I posted at the top I dont have any right now but I will take some this evening and post them tonight......nice quote
Thread Starter
Junior Member
iTrader: (3)
Joined: Jul 2004
Posts: 13
Likes: 0
From: white plains, Maryland
Car: 91 Rs
Engine: 383 hydrolic roller carb
Transmission: T-56
Axle/Gears: 3.73
Re: SLP 1 3/4 Shorties W/Ypipe
these are sole.....I still have a strut tower brace for tpi cars...$75 if anyone interested
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
Jan 9, 2016 09:22 PM
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
Sep 30, 2015 08:45 PM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 25, 2015 03:51 PM