[OH] E-Tec 170, Performer RPM, Holley StealthRam
Thread Starter
Joined: Jun 2004
Posts: 194
Likes: 0
From: Cleveland, OH
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
E-Tec 170, Performer RPM, Holley StealthRam
For sale: Complete Vortec -style top-end for Small Block Chevy -- carb or EFI!
Edelbrock E-Tec 170 (# 60979), pair of heads, have been milled .010" but are otherwise the same as they were out of the box -- same valves, springs, guideplates, etc, They only have a few hundred miles (maybe 1000, tops) and are in excellent condition. Heads have steam holes drilled for use on 400 block (will still work fine on 350/383 block). Steam holes & Milling work performed by Michael's Racing Engines in Macedonia, OH. $750 Selling because I need heads with larger combustion chamber.
Performer RPM Air-Gap for Vortec (# 7516), like new. Has about 2 hours of runtime, used for engine/cam break-in. $200
Holley Stealth Ram for Vortec (# 7542), like new. Comes with fuel rails + adjustable regulator. $450
If you buy the heads + either intake, I'll include (8) ARP intake bolts (# 134-2002), a set of Fel Pro head gaskets (# 8364-PT), a set of reusable GM vortec intake gaskets (# 89017465) and 8 new spark plugs (Champion, I think). Over $100 to buy all this stuff if you don't have it. What a deal!
E-Tec Heads + Performer RPM == $950
E-Tec Heads + Stealthram == $1200
I can throw in a set of Crane 11744-16 rockers with poly-locks for an additional $90. (1.5, full roller, *not* self-guided)
Cash only, no trades. Prefer local pickup (Chesterland, OH) but can ship for reasonable extra cost.
-Dave
Edelbrock E-Tec 170 (# 60979), pair of heads, have been milled .010" but are otherwise the same as they were out of the box -- same valves, springs, guideplates, etc, They only have a few hundred miles (maybe 1000, tops) and are in excellent condition. Heads have steam holes drilled for use on 400 block (will still work fine on 350/383 block). Steam holes & Milling work performed by Michael's Racing Engines in Macedonia, OH. $750 Selling because I need heads with larger combustion chamber.
Performer RPM Air-Gap for Vortec (# 7516), like new. Has about 2 hours of runtime, used for engine/cam break-in. $200
Holley Stealth Ram for Vortec (# 7542), like new. Comes with fuel rails + adjustable regulator. $450
If you buy the heads + either intake, I'll include (8) ARP intake bolts (# 134-2002), a set of Fel Pro head gaskets (# 8364-PT), a set of reusable GM vortec intake gaskets (# 89017465) and 8 new spark plugs (Champion, I think). Over $100 to buy all this stuff if you don't have it. What a deal!
E-Tec Heads + Performer RPM == $950
E-Tec Heads + Stealthram == $1200
I can throw in a set of Crane 11744-16 rockers with poly-locks for an additional $90. (1.5, full roller, *not* self-guided)
Cash only, no trades. Prefer local pickup (Chesterland, OH) but can ship for reasonable extra cost.
-Dave
Thread Starter
Joined: Jun 2004
Posts: 194
Likes: 0
From: Cleveland, OH
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
Re: E-Tec 170, Performer RPM, Holley StealthRam
They were 64cc from Edelbrock. They shouldn't be any less than 62 now.
-Dave
-Dave
Thread Starter
Joined: Jun 2004
Posts: 194
Likes: 0
From: Cleveland, OH
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
Junior Member
Joined: Jul 2006
Posts: 6
Likes: 0
Re: E-Tec 170, Performer RPM, Holley StealthRam
I am interested in the stealth ram. e-mail at sauercream84@hotmail.com
Trending Topics
Thread Starter
Joined: Jun 2004
Posts: 194
Likes: 0
From: Cleveland, OH
Car: '70 Chevelle, '63 Corvette
Engine: 383, 327
Transmission: B&M 700r4, Muncie M-21
Re: E-Tec 170, Performer RPM, Holley StealthRam
Sorry, all stuff is no longer available.
-Dave
-Dave
Thread
Thread Starter
Forum
Replies
Last Post
