SOLD

Parts to convert an Auto to 6 Speed

95 LT T56 with 50k miles
bell housing
Brand new Spec clutch disc
Brand new Spec plate
Brand new aluminum flywheel
New TO bearing
ARP flywheel bolts
slave cylinder
fork
reseroir and hoses
master cylinder
pedal assembly, bolts right in
SPD cross member
urethane mount

only thing needed is a yoke and DS

SOLD

This is a steal, the clutch kit and flywheel were 800.

602-670-8880

 

I'd be all over this if you weren't so far away!

 

Its a nice drive down to AZ, come get it.

 

I'd be all over it too man, wow. can't believe nobody has posted or taken it yet. by the way, its a nice day, drive up to Toronto

 

are you willing to ship?

How much to 98203?

 

Id be willing to drive to arizona for this, but I need to read up more about the swap. Would any work need to be done to the stock ecu or wiring harness?

 

I noticed that you got one of those 467 CI "Butler Beast" Poncho motors. Those boys sure do build wicked engines.
Their shop in Leoma, TN is about 15 miles from where I live (out in the country), and occasionally on a quite evening, you can hear some of their customer's "bullets" singing a 7-8,000+ RPM song!
I might drop by and record a dyno room session and post it on here for all our 3rd Gen buddies.

 

Its a bolt in deal, you will need a converter for the speedo (elec to mech) you wont need the lock up plug anymore. You will need to trim about a 1/4" on the pass side for the shifter but it lines up with the hole front to back. I have the shifter on ebay for sale so it does not come with it.
I have alot of interest so.....dont wait.

 

anything wrong with it? any grinding? leaking? im very interested

 

Sorry, The trans is sold, sold, sold, sold, sold, sold, sold!