[PA] exhaust
Member
iTrader: (8)
Joined: Mar 2007
Posts: 343
Likes: 1
From: Shreveport Louisianna Barksdale AFB
Car: 85 Camaro
Engine: forged 383 11:1
Transmission: T56 TDP STAGE 2
Axle/Gears: 99 ws6 3.42 posi rear
Re: exhaust
Call me 919 279 1842 im very interested and have cash but need to talk about a few details
Junior Member
Joined: Oct 2008
Posts: 36
Likes: 0
From: Sussex, Wisconsin
Car: 1991 RS Camaro
Engine: 305
Transmission: T5
Axle/Gears: 9 bolt 3.27
Re: exhaust
how much do you want for it do the headers come with and what size is it from the headers into the y and what size is the single after the y
Trending Topics
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: exhaust
The headers are headman 1 5/8 and i had to cut the collectors off to weld reducers on. I did that so they will fit with the t-5 hydrolics. The y-pipe is 2 1/2"into 3" and i used a flowmaster y-collector for the transition. On the exhaust now is an SLP resonator to copy the loudmouth exhaust but i do have a Magnaflow muffler that was on this when I first fabed the exhaust. I guess the price depends on how much you want. Shipping would be hard so i would like to stay within driving distance of lancaster county pa and i am willing to meet some place also. I guess Ill start at 300 for just the y-pipe and exhaust as it is now and add 75 for the headers and 75 for the muffler and tips. i know its not the best looking but Im prety confident that it outflows any other aftermarket setup and it took some time to build. Im going to try and get some pics of the headers and muffler up asap
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: exhaust
here are pics of the header to clutch fork clearance and the muffler. had to cut the pics down so i could post them. and thanks for the good word shadow z. ill hopefuly have some other projects up in the near future.
Junior Member
Joined: Mar 2011
Posts: 48
Likes: 0
From: Grizzly Flats, CA
Car: 86 Camaro, IROC springs & bars
Engine: Mild 350,Q-jet,headers
Transmission: M-21, 12#flywheel
Axle/Gears: 98 7.5, 3.73 torsen.
Re: exhaust
Interested in the headers, call if you like 530-642-9563, or gummybear99@att.net I can handle the phone, my wife does the e-mail. Think I'm turnin into an old fart!.
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: exhaust
lemons racer i would like to sell the stuff together if i can. im not in to big of a rush to sell just yet. ill keep you in mind thanks.
Junior Member
Joined: Mar 2011
Posts: 48
Likes: 0
From: Grizzly Flats, CA
Car: 86 Camaro, IROC springs & bars
Engine: Mild 350,Q-jet,headers
Transmission: M-21, 12#flywheel
Axle/Gears: 98 7.5, 3.73 torsen.
Re: exhaust
tpibird305spd
Thank you for responding to my post. I am not in a big hurry either because it is just for a cheap road race car I am putting together and am just looking for a better set than I already have
lemons racer
Thank you for responding to my post. I am not in a big hurry either because it is just for a cheap road race car I am putting together and am just looking for a better set than I already have
lemons racer
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: exhaust
Bump. Just orderd the stuff for my next exhaust. I'll try to get a sound clip together with the magnaflow installed. $450 OBO for all of it Headers,Y-pipe,mid-pipe and muffler. will ship at buyers expense
Thread Starter
Junior Member
iTrader: (7)
Joined: Apr 2006
Posts: 28
Likes: 0
From: PA
Car: firebird
Engine: 355
Transmission: T-5 NWC
Axle/Gears: 4.11
Re: exhaust
Good sounding exhaust. Still on the car till it gets sold so you can come hear it befor you buy it.
Thread
Thread Starter
Forum
Replies
Last Post
david068513
Camaros for Sale
0
Sep 18, 2015 10:36 AM





