Wanted: Solid Roller Cam
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Wanted: Solid Roller Cam
........ Hey Guys ... I'm looking for a good used small base circle solid roller cam for a retro or OEM roller block that has specs similar to the Comp Cams XR286R or XR292R ..... basically looking for 106-110 LSA ... 250-260 duration at .050 ... .650 or less lift .......... Thanks , Bob ........
Last edited by C409; May 19, 2012 at 03:18 PM.
Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Wanted: Solid Roller Cam
Well I missed it by that much.....
was going to use this in my 406, solid roller with duration of 272 at .050 had lift of around 710 but I had it lowered to 560 or 570, you know so it would be small enough to drive on the street. cheers for ca.
was going to use this in my 406, solid roller with duration of 272 at .050 had lift of around 710 but I had it lowered to 560 or 570, you know so it would be small enough to drive on the street. cheers for ca.
Supreme Member
iTrader: (26)
Joined: Nov 2002
Posts: 2,108
Likes: 8
From: Moneta, VA
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
................ I'd be more interested in the cam out of that 2.8 S10 motor ................. Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Wanted: Solid Roller Cam
also have a custom comp billet solid roller cam 60 miles on it cherry
paid 600 sell 300 firm
280/286
250/254
110 lsa
with 1.6 670/660 gross lift before lash. 1.5 easy to do the math
Sounds nasty will still pull 10 in vac at 1000. Good driving manners despite its sound.
FYI...........This is listed on this site too.
paid 600 sell 300 firm
280/286
250/254
110 lsa
with 1.6 670/660 gross lift before lash. 1.5 easy to do the math
Sounds nasty will still pull 10 in vac at 1000. Good driving manners despite its sound.
FYI...........This is listed on this site too.
Member
Joined: Feb 2008
Posts: 219
Likes: 0
From: Antelope Valley, Ca...So.Cal.
Car: was 85 TA, 91 TA both sold
Engine: was 406, now 305 tpi
Transmission: 85 had700r4,350..91 had t5
Axle/Gears: 323,373,342
Re: Wanted: Solid Roller Cam
[CA] Forged Gen1 rotating assy. (pics)
Here is the ad it is in....cheers
Here is the ad it is in....cheers
Trending Topics
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Re: Wanted: Solid Roller Cam
............. Still Looking ..............
Senior Member
iTrader: (5)
Joined: May 2005
Posts: 831
Likes: 1
From: Midwest IL
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Member
iTrader: (1)
Joined: Aug 2006
Posts: 191
Likes: 0
From: Detroit
Car: 84 Transm
Engine: 350 sbc
Transmission: t400
Axle/Gears: ford 9", 3.90
Re: Wanted: Solid Roller Cam
I have a Lunati 60132 Solid Roller. Worked great! Used one season, but in new condition. $200
http://www.summitracing.com/parts/LUN-60132/
http://www.summitracing.com/parts/LUN-60132/
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Re: Wanted: Solid Roller Cam
........... Still looking ...........
Supreme Member
iTrader: (29)
Joined: Sep 1999
Posts: 1,410
Likes: 2
From: Location, Location!
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Thread Starter
Joined: Jan 2009
Posts: 70
Likes: 4
From: Clearwater , Florida
Car: '87 Vette C4
Engine: 400 + .040 = 409 ci
Transmission: 700R4 built
Axle/Gears: Dana 44 w/3.42's
Re: Wanted: Solid Roller Cam
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM