WTB: Carb setup

Thread Tools
 
Search this Thread
 
Old Aug 16, 2006 | 11:42 PM
  #1  
350IROC1989's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 69
Likes: 0
From: Drums, PA
Car: 1989 Camaro Iroc Z
Engine: GM Goodwrench 350
Transmission: T-5 Manual
WTB: Carb setup

I'm looking for a STOCK intake, carb, and distributor setup for a 350. 305 would possibly work, also. I'll be switching the carb to something bigger later in the future. 4 bbl is preferred, but most anything will do. Parts need to be in working order, let me know what you have!
Reply
Old Aug 17, 2006 | 09:19 AM
  #2  
djtricia's Avatar
Senior Member
iTrader: (4)
 
Joined: Feb 2005
Posts: 593
Likes: 0
From: Portage, MI.
Car: 1986 Z-28
Engine: 350
Transmission: 700R4
Try the local pick your part or what ever they call it where you take the parts of a junk car. It's the cheapest thing for what your looking for.
Reply
Old Aug 17, 2006 | 05:54 PM
  #3  
350IROC1989's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 69
Likes: 0
From: Drums, PA
Car: 1989 Camaro Iroc Z
Engine: GM Goodwrench 350
Transmission: T-5 Manual
Will even go with an aftermarket intake/carb... that's mostly preferred in light of some new information. Let me know what you have. I'll buy the parts seperate too, if for the right price.
Reply
Old Aug 18, 2006 | 08:34 AM
  #4  
FORMULA355TPI's Avatar
Member
 
Joined: May 2002
Posts: 292
Likes: 0
From: BENSALEM, PA
Car: 88 FORMULA / 88 IROC
Engine: 355 / 355
Transmission: T5 / TH400
Axle/Gears: 10 Bolt-3.73 / 9"-3.90
I have a torquer 2 intake and a avanti prepped holley 650 dp, also I have GM hei distributors as well.. You can have the carb, intake, and distributor for $275

Josh
215-783-4645
Reply
Old Aug 20, 2006 | 12:17 AM
  #5  
Randy82WS7's Avatar
Supreme Member
 
Joined: Mar 2002
Posts: 4,812
Likes: 0
From: 62656
Car: 1991 S10 pickup 2700lbs
Engine: 4.3L Z TBI
Transmission: 700R4
Axle/Gears: 3.08 7.625"
i have a nice 1978 rochester Q jet carb for manual trans cars only, and its is factory electric choke correct for these third gen F bodies, and also is the correct accelerator cable stud and clip too,

is really a nice carb, not a grimy nasty old beater one, not exaggerating,


i have no way to pic it til i find an xD pic card reader, if someone knows of one ? i need it

60 bucks mailed steals it


would trade the carb for factory 82 83 84 bird parts


i have a non computer HEI distributor too,


good luck

Last edited by Randy82WS7; Aug 20, 2006 at 12:23 AM.
Reply
Old Aug 20, 2006 | 12:51 AM
  #6  
350IROC1989's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2006
Posts: 69
Likes: 0
From: Drums, PA
Car: 1989 Camaro Iroc Z
Engine: GM Goodwrench 350
Transmission: T-5 Manual
Interested in your carb. You've got PM.

FORMULA355TPI - I'm interested in your setup, also. Though that's a little more than I was hoping to spend. Perhaps we can work something out? I don't think your area is too far away from where I am. I can do a pickup.<SCRIPT type=text/javascript> vbmenu_register("postmenu_3027009", true); </SCRIPT>
Reply
Old Aug 20, 2006 | 09:14 AM
  #7  
Tiresmokin's Avatar
Junior Member
 
Joined: Sep 2005
Posts: 72
Likes: 0
From: Oshkosh,WI
I have a Quadrajet carb off a chev 350. Believe it was an 83 or 84 truck. I have another one still on a 350. Unknown what year. Probably have a HEI dist somewhere too.
Reply
Old Aug 20, 2006 | 10:16 AM
  #8  
FORMULA355TPI's Avatar
Member
 
Joined: May 2002
Posts: 292
Likes: 0
From: BENSALEM, PA
Car: 88 FORMULA / 88 IROC
Engine: 355 / 355
Transmission: T5 / TH400
Axle/Gears: 10 Bolt-3.73 / 9"-3.90
IROC- you can get in touch with me if you are interested @ 215-783-4645
Josh
Reply
Old Aug 23, 2006 | 04:11 PM
  #9  
nelapse's Avatar
Supreme Member
iTrader: (17)
 
Joined: Jan 2005
Posts: 2,716
Likes: 3
From: Mobile, AL
Car: GTA
Engine: 383 HSR
Transmission: TH-700R4
Axle/Gears: 3.42
i have an edelbrock 600 carb 800 miles on it, selling for $125 shipped
i have an edelbrock performer RPM intake 50 miles on it $120 shipped
I have a distributor, with new coil, and moroso super ignition system components, I will sell for $120 shipped (only 800 miles on the distrib)
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
pjsparts
Tech / General Engine
11
Oct 29, 2025 06:39 PM
GeneralIesrussi
Carburetors
6
Jun 20, 2024 07:21 PM
makaveli09
Engine/Drivetrain/Suspension Parts for Sale
1
Sep 15, 2015 10:43 AM
rjcme
Tech / General Engine
0
Sep 5, 2015 01:23 PM
GeneralIesrussi
Tech / General Engine
0
Sep 3, 2015 03:23 AM




All times are GMT -5. The time now is 05:20 PM.