WTT Carb tank pick-up/sender
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
WTT Carb tank pick-up/sender
I have a carb type fuel tank pick-up/sending unit in good condition (needs new pick-up sock). Will trade for in-tank electric pick-up.
PM, email, or respond here.
Thanks.
PM, email, or respond here.
Thanks.
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: WTT Carb tank pick-up/sender
Anyone converting from EFI to carb that wants to swap pick-ups?
Member
iTrader: (1)
Joined: Aug 2001
Posts: 303
Likes: 0
From: New york
Car: 87 IROC Z "ZZ4"
Engine: 350 "ZZ4"
Transmission: ck performance th400 3000 stall
Axle/Gears: 3:73 10 bolt
Re: WTT Carb tank pick-up/sender
figures. wish i could help. i need to get a carb pick up but i cant take the efi pick up out of my car yet. if you manage to get one and still have the carb pick up let me know if you wanna sell it.
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: WTT Carb tank pick-up/sender
I'm not in a hurry. When do you think you'd be able to pull yours?
Junior Member
Joined: Sep 2008
Posts: 82
Likes: 0
From: Clarksville TN
Car: 1987 Trans Am GTA
Engine: 355 TPI
Transmission: 700R-4
Axle/Gears: 10 bolt limited slip with 3.42
Re: WTT Carb tank pick-up/sender
I am currently gathering the parts to do the swap.. Going from TPI to Carb..
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Re: WTT Carb tank pick-up/sender
Eventually I'll have two. One is out of the car now, the other will be when I install the EFI pick-up.
Supreme Member
Joined: Dec 2005
Posts: 9,920
Likes: 885
From: 53.0907° N, 113.4695° W
Re: WTT Carb tank pick-up/sender
I have a pick up from my 86 TPI IROC that I converted to carb a few years ago. It's sitting on my parts shelf. I'll also have another pickup from an 87 Coupe ( 2.8 TBI) that I'm working on. I'm swapping all the go fast parts from the IROC to the coupe and will need a carb style pick up when I convert this off season. (The IROC gets relegated to winter beater status with a carbed 305)
I checked UPS ground freight cost for a 10 lb. package from CO to my U.S. shipping address near Chicago and it comes in around $11 USD.
What do you think?
I checked UPS ground freight cost for a 10 lb. package from CO to my U.S. shipping address near Chicago and it comes in around $11 USD.
What do you think?
Trending Topics
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
PM shipping addresses and I'm good with that.
The sending unit works, I assume. I'd be replacing the pump one way or the other.
The sending unit works, I assume. I'd be replacing the pump one way or the other.
Senior Member
iTrader: (15)
Joined: Jan 2009
Posts: 753
Likes: 0
From: Ogden UT
Car: '88 Camaro (Gone...)
Re: WTT Carb tank pick-up/sender
I appologize in advance if this is a dumb question, but what are the differences exactly between the carb and EFI pick-ups?
I'm asking because I originally had a 2.8 MPFI which I swapped out to a carbed 355. I kept the in tank pump and used a regulator, but if/when my pump bites the dust I would consider swapping to an inline or mechanical pump. Thanks for any response, sorry for hijacking the thread
I'm asking because I originally had a 2.8 MPFI which I swapped out to a carbed 355. I kept the in tank pump and used a regulator, but if/when my pump bites the dust I would consider swapping to an inline or mechanical pump. Thanks for any response, sorry for hijacking the thread
Thread Starter
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
See EFI pick-up here: https://www.thirdgen.org/forums/carb...nk-pickup.html
Carb pick-up (partial - sorry, didn't take an overall photo):
https://www.thirdgen.org/forums/atta...ickup-sock.jpg
Carb pick-up (partial - sorry, didn't take an overall photo):
https://www.thirdgen.org/forums/atta...ickup-sock.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Bohemian
History / Originality
24
Aug 15, 2017 05:11 PM