Looking for T-5 setup
Thread Starter
Junior Member
Joined: Aug 2010
Posts: 4
Likes: 0
From: CNY
Car: 1989 Camaro RS
Engine: 2.8L
Transmission: T-5
Looking for T-5 setup
i am looking for V8 T-5 and flywheel clutch setup for a pre 86 SBC. I am located in Central NY. Let me know what you have got.
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Looking for T-5 setup
I have a T-5 from an 84 1/2 LG4 L69 Car.I only have the trans itself,nothing else.Located in Philadelphia Pa
Supreme Member
iTrader: (5)
Joined: Dec 2001
Posts: 2,873
Likes: 5
From: East Tennessee
Car: 1992 Z28 Heritage Edition
Engine: L98
Transmission: T56
Axle/Gears: 3.23:1
Re: Looking for T-5 setup
You'll probably have to piece together what you want. I did. I got the flywheel and trans from one place, then the T/A mount at the junkyard, then the clutch from somewhere else, then the.......... it goes on and on.
So far, this swap has run me about $500 just in parts.
So far, this swap has run me about $500 just in parts.
Thread Starter
Junior Member
Joined: Aug 2010
Posts: 4
Likes: 0
From: CNY
Car: 1989 Camaro RS
Engine: 2.8L
Transmission: T-5
Re: Looking for T-5 setup
I figured as much but i thought it was worth a shot to see what people have, i really want to find a donor car around here that i could turn around and sell or drop a 350 and TH350 in and sell to a friend.
Philly is somewhat of a drive from here. But how much would you take for it?
Philly is somewhat of a drive from here. But how much would you take for it?
Member
Joined: Jul 2010
Posts: 172
Likes: 0
From: Circleville Ohio
Car: 65 Nova Wagon
Engine: 358
Transmission: 350 turbo
Axle/Gears: 410
Re: Looking for T-5 setup
I have a T5 set up
it was in a 91 camaro Rs 112k original miles less then 900 on rebuild
All New seals/syncros/solid input shafts ect (this alone was $950)
Shifter (Stock)
Stock Clutch/pressure plate with some life left
Flywheel for pre 86 motor(2 peice rear main seal)
Id take $850+Shipping
I am in Chillicothe Ohio 45601
I have all the stuff for swap except slave cylinder/fluid resivor/clutch fork(i might have this)
614 364 9995
it was in a 91 camaro Rs 112k original miles less then 900 on rebuild
All New seals/syncros/solid input shafts ect (this alone was $950)
Shifter (Stock)
Stock Clutch/pressure plate with some life left
Flywheel for pre 86 motor(2 peice rear main seal)
Id take $850+Shipping
I am in Chillicothe Ohio 45601
I have all the stuff for swap except slave cylinder/fluid resivor/clutch fork(i might have this)
614 364 9995
Trending Topics
Joined: Aug 1999
Posts: 5,266
Likes: 463
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Looking for T-5 setup
I've got a couple stock clutch/flywheels. I'll check to see if they are for 2-pc RMS,............
Senior Member
Joined: May 2006
Posts: 581
Likes: 0
From: NY
Car: 00 SSEi / 94 C4
Engine: 231 / 383
Transmission: 4T65E / ZF 6sp
Axle/Gears: 2.93 / Dana 44 3:45
Re: Looking for T-5 setup
1989 Complete WC T5 new TOB, New Flywheel
5th gear Billet retainer, Pro 5.0 shifter,
new cylinder if you need pedals $750 Your in NY I'll Meet you
5th gear Billet retainer, Pro 5.0 shifter,
new cylinder if you need pedals $750 Your in NY I'll Meet you
Senior Member
Joined: Apr 2009
Posts: 554
Likes: 0
From: montreal-canada
Car: 1985 camaro Z/28
Engine: 305 V/8 4bbl carb
Transmission: T5 WC
Axle/Gears: 3-23 posi with 4 wheel discs
Re: Looking for T-5 setup
hi , i need a cluster gear for my T5 , it's a 1987 ..anyone have?,,even used...thanks.
Senior Member
Joined: Nov 2008
Posts: 311
Likes: 0
From: Ft Campbell, KY
Car: 1991 Camaro RS/Z28
Engine: 357 Edelbrock Intake & Holley Carb
Transmission: WC T-5
Axle/Gears: whatever stock is
Re: Looking for T-5 setup
What do you have right now for your car? I have a T-5WC setup that I swapped in but now I want the 700-R4 back lol. The trans does need a rebuild but the slave cylinder, clutch master cylinder, and clutch setup are brand new. Everything would be up for trade for a complete 700-R4 setup.
Thread
Thread Starter
Forum
Replies
Last Post