i need these bolts for the plenum



also the three that goes on the plenum part that hangs over the distributor


the bracket to bolt the ignition coil that bolts to the intake for a 305 tpi

and a daul fan (no wires just the fans and motors etc)




pm me or txt me 704 460 6394


also need a good goose neck or just those bolts lol

 

I have to sets of dual fans,make me an offer

 

https://www.thirdgen.org/forums/engi...-dual-fan.html

 

they should be M8 with a 1.25 mm Pitch x 30mm long you can get allen head bolts for cheap.

 

go0d looking out

 

pm sent

 

You wanting to use the OE style bolts?

 

any bolts i hqave no clue the size for the part that goes over the distributorseeing if any one couldhelp i might give hawks a email

got runner bolts

 

really need the bracket for the igntion coil to bolt to the intake manifold i do not have this?

 

the two manifold bolts on the rear passenger side had threads past the bolt heads. on the tbi manifold there was a bracket there to lift out the motor. i used the same two bolts and mounted the coil bracket to it. i have a coil bracket for it. ill try to get a closer pic of it fr you, otherwise you might be able to see what im talking about in the pics on the tpi conversion i did.
the alternative is to mount the coil on th firewall, using a custom bracket.

 

thanks man i was looking at into doing that qith the fire wall
or get a hei but idk if it will still fit uner the plenum cover for the distributor

 

I got one extra cover left and a pair of electric fans, take 100 bucks for all of it (might even have the coil mount)

 

fan have mounting brackets and workin motors

 

Those three screws for the distributor cover are available from GM Parts Direct P/N 14083852.THOSE BUGGERS ARE EXPENSIVE

 

thanksfor the heads up

 

bird, ya still need the coil bracket? i have the brackets and the part that mounts all of it to the intake. make me an offer.

 

hm 15 shipped?

 

how bout $20?, i even have all of the correct bolts that hold the coil brackets together and the bolts that hold the coil brackets to the mount that bolts to the intake.

 

damn i should have asked for ten. . . . lol

post a pic in my book it onl;y shoiws onme bracket that bolts to the two intake bolts??

thanks guys

 

yeah, there is the 2 coil backets that sandwich the coil and that bolts to a bracket that mounts to the intake.

still need it?

 

i need to learn how to spell but yes sir i do but if u still would post a pic would be nice i can send 24 hrs from now

 

i'll be gad to shoot ya a few shots. i'll do so when i get home from work tomm (tues) eve.

 

as requested.

 

awesome come tomorrow considered sold

 

pay pal to: quickchickenta@yahoo.com

 

thanks to all

 

payment sent

 

if you still need it i got the fans with all brackets and wiring, the bolts and the coil bracket make me an offer i need to sell broken arm and out of work so shoot me someething reasonable