Anyone know a part number or place to find a wire loom for a 1991 5.0 TPI car? It is the one that holds the throttle cables above the intake runners (top drivers side)? It is a 3 position loom that mounts on a post that goes into the intake maifold. The top half broke when I was replacing the fuel injectors and I have not been able to find a replacement. Unfortunately, there are no bone yards with parts cars within 100 miles of me. Thanks.

 

That is actually a "spark plug wire" retainer . The OE number is/was 8917256

http://www.ebay.com/itm/NOS-1978-1979-1980-Chevrolet-Monte-Carlo-305-LH-Spark-Plug-Wire-Retainer-8917256-/390571623532?pt=Vintage_Car_Truck_Parts_Accessories&hash=item5aefe2046c&vxp=mtr

 

Thanks for the suggestion but the one you show in the picture is a 4 position spark plug wire loom. It separates plug wires but has no way to anchor to the manifold post. I am looking for a 3 position loom that is used on the throttle cables to keep them routed off of the top of the engine. Appreciate your help but I need to keep looking.

 

I guess I don't know what you are looking for I thought you were looking for the throttle cable/tv , cruise retainer that goes on the plenum runner stud.

 

Maybe this will help you find what your looking for.

 

Very interesting. Thank you. Now I see where you got the 8917256 part number from - its on this exploded view diag but it is not the one mounted on my block. Here are 2 pics of mine. As you can see, it is a 3 position loom mounted on a shaft that is screwed into the side of the air intake body.

The bolted side on mine is fine, the top clip is the part that is broken. I will keep looking but I really appreciate your help with this. It is a very minor part, but I want to find the exact replacement.

 

Check with don, he a real good guy and has alot of tpi parts.

https://www.thirdgen.org/forums/engi...9-formula.html

 

Thanks for the contact.