Injectors wanted

Thread Tools
 
Search this Thread
 
Old Jan 4, 2014 | 08:46 PM
  #1  
sparks454's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 236
Likes: 1
From: medina, ohio
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Injectors wanted

Looking for a good tested set of 8, 68lb or 72lb injectors. Let me know what you have..Also, wholesalepartsbarn on ebay carries tons of refurb'd injector sets from TLF performance. Free shipping and $200 with a 1 year warranty doesn't sound bad at all for a set of 68lbs or 70's, but has anyone ever used injectors from them? Flow matched as well. Ford or GM ev1's, high impedance..Thanks, Chris. c_lehman67@hotmail.com

http://www.tlfperformanceparts.com/

Remanufactured by TLF Performance Parts, USA
Colors may vary
Set of 8
Warranty: 1 year
TLF Performance Part fuel injectors for the Camaro & Corvette feature drop-in fitments for a simple installation. Since they are made from Bosch manufactured injectors, they will fit directly into the stock or any aftermarket fuel rail.
ALL FUEL INJECTORS ARE FLOW MATCHED & FLOW TESTED.



http://www.ebay.com/itm/380806888522...ht_1003wt_1026

http://www.ebay.com/itm/380807834033...ht_1122wt_1026

Last edited by sparks454; Jan 5, 2014 at 07:42 AM.
Reply
Old Jan 7, 2014 | 09:23 PM
  #2  
southbay08's Avatar
Sponsor
15 Year Member
 
Joined: Nov 2008
Posts: 1,528
Likes: 49
From: Rockville Centre, NY
Re: Injectors wanted

Those injectors are actually modified Bosch lll's. Bosch does not make that type of injector in 70lb. If you want to give us a call we can try to help you as well.
Reply
Old Jan 7, 2014 | 09:25 PM
  #3  
sparks454's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 236
Likes: 1
From: medina, ohio
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Injectors wanted

I will check out your products or Let me know what you have around 68 or 72 then for under $199. I think I will give them a try since they have a 1 year warranty on them. I also work for Siemens so I have had companies grant me a 15% discount, but some of those are pricey. PM me with what you have, but for the price and flow ratings, I think the ones offered by TLF are decent.
Thanks,
Chris

Last edited by sparks454; Jan 7, 2014 at 09:30 PM.
Reply
Old Jan 8, 2014 | 05:34 AM
  #4  
anesthes's Avatar
TGO Supporter/Moderator
25 Year Member
iTrader: (13)
 
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Injectors wanted

Originally Posted by sparks454
Looking for a good tested set of 8, 68lb or 72lb injectors.
68 or 72 lbs?

For the procharged t/a ??

-- Joe
Reply
Old Jan 8, 2014 | 06:29 AM
  #5  
sparks454's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Mar 2004
Posts: 236
Likes: 1
From: medina, ohio
Car: 1987 GTA
Engine: 383 HSR Procharged
Transmission: TKO600
Axle/Gears: Moser 9", 35 spline Wavetrac 3.89's
Re: Injectors wanted

Actually for a different car that I am working on, but I am looking for a set for mine as well. Was going to change mine in the spring if I can't get it tuned with the 30's in there.
Reply
Old Jan 8, 2014 | 07:39 AM
  #6  
anesthes's Avatar
TGO Supporter/Moderator
25 Year Member
iTrader: (13)
 
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Injectors wanted

Originally Posted by sparks454
Actually for a different car that I am working on, but I am looking for a set for mine as well. Was going to change mine in the spring if I can't get it tuned with the 30's in there.
Ahh. 30's should support 490-500hp depending on the bsfc of the total setup.

I'm tempted to sell my 42s and move to a 50lb for my turbo build.

-- Joe
Reply
Old Jan 9, 2014 | 07:19 AM
  #7  
anesthes's Avatar
TGO Supporter/Moderator
25 Year Member
iTrader: (13)
 
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Injectors wanted

Originally Posted by southbay08
Those injectors are actually modified Bosch lll's. Bosch does not make that type of injector in 70lb. If you want to give us a call we can try to help you as well.
You alive? I sent you a PM yesterday...

--Joe
Reply
Old Jan 9, 2014 | 07:34 AM
  #8  
southbay08's Avatar
Sponsor
15 Year Member
 
Joined: Nov 2008
Posts: 1,528
Likes: 49
From: Rockville Centre, NY
Re: Injectors wanted

Yes I'm alive..wasn't in front of my computer yesterday. Dealing with some major heating issues with the plumber. I will look at your pm now
Reply
Old Jan 9, 2014 | 08:22 AM
  #9  
anesthes's Avatar
TGO Supporter/Moderator
25 Year Member
iTrader: (13)
 
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Injectors wanted

Originally Posted by southbay08
Yes I'm alive..wasn't in front of my computer yesterday. Dealing with some major heating issues with the plumber. I will look at your pm now
My water pipes froze at my house. Hopefully this weekend will thaw out.

Global warming my ***

-- Joe
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steve78LT
Tech / General Engine
4
Feb 24, 2016 12:15 AM
gta90
TPI
40
Sep 15, 2015 04:00 PM
Jae992
TBI
3
Aug 27, 2015 09:07 AM
justin57
TBI
30
Aug 20, 2015 07:05 PM
tmellott89
DIY PROM
2
Aug 16, 2015 02:58 PM




All times are GMT -5. The time now is 12:12 PM.