[FL] Need a few V8 Swap Parts: Mounts, MAF, Accessories
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Need a few V8 Swap Parts: Mounts, MAF, Accessories
Hey everybody,
I'm trying to help my roommate wrap up a V8 swap on his 92 bird. Here's the few parts we really need to finish this up:
1. V8 F-body upper and lower motor mounts
2. F-body Serpentine Brackets, Power Steering Pump, Alternator, and all pulleys
3. MAF sensor
Here's some other parts we wouldn't pass up the chance at used:
1. Vortec Stealth Ram and Rails
2. Hooker shorty header Y-pipe
3. Cat-back system, preferrably magnaflow or dynomax, but will entertain others
I'll post as soon as we find stuff.
-cal30sniper
I'm trying to help my roommate wrap up a V8 swap on his 92 bird. Here's the few parts we really need to finish this up:
1. V8 F-body upper and lower motor mounts
2. F-body Serpentine Brackets, Power Steering Pump, Alternator, and all pulleys
3. MAF sensor
Here's some other parts we wouldn't pass up the chance at used:
1. Vortec Stealth Ram and Rails
2. Hooker shorty header Y-pipe
3. Cat-back system, preferrably magnaflow or dynomax, but will entertain others
I'll post as soon as we find stuff.
-cal30sniper
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
Got Engine Mounts
Joined: Aug 1999
Posts: 5,276
Likes: 469
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
I've got a Serpentine conversion for sale, $240 + shipping. Most parts have been blasted / painted and are in real good condition. ( NOT rusted/cruddy parts pulled from the latest 250K Thirdgen in the local boneyard. ) The set-up includes everything but the water pump.
All pulleys
All Brackets
AC compressor
Steering Pump
Smog Pump
Alternator
Steering lines
hardware/ belt
Worth mentioning; You said you already got the motor mounts. I've also got the engine mount "clamshells" ( bolt to engine ) if you still need them too.
This stuff is heavy,... might be best to ship in 2 boxes because it's so heavy. If your seriously interested in these parts just get back to me with your ZIP code for shipping quotes. ( and let me know if you need clamshells. )
All pulleys
All Brackets
AC compressor
Steering Pump
Smog Pump
Alternator
Steering lines
hardware/ belt
Worth mentioning; You said you already got the motor mounts. I've also got the engine mount "clamshells" ( bolt to engine ) if you still need them too.
This stuff is heavy,... might be best to ship in 2 boxes because it's so heavy. If your seriously interested in these parts just get back to me with your ZIP code for shipping quotes. ( and let me know if you need clamshells. )
Joined: Feb 2006
Posts: 1,265
Likes: 0
From: Sacramento Ca
Car: 86 Trans am, 91 Camaro RS
Engine: 355 Sbc, nothin yet
Transmission: 700r4- both
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
Do u have the rubber mounts or the polys. I have brand new rubbers still in the box. Also have the upper metal mounts that attach to.the block. Shoot me an offer.
Junior Member
iTrader: (5)
Joined: Oct 2013
Posts: 30
Likes: 0
From: Wayne Mi
Car: 1991 RS
Engine: 383 stroker
Transmission: t56
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
I have this as well with an ac delete. I wont sell the alternator or powerstearing pump, but for @100 plus ship i will sell all the brackets and pulleys. There in good shape, pic upon request
Thread Starter
Member
iTrader: (16)
Joined: Dec 2006
Posts: 469
Likes: 1
From: TX/FL
Car: 88 GTA/86 C20 Burb/91 325i
Engine: L98/454/M20
Transmission: 700R4/NV4500/Getrag
Axle/Gears: 3.27 9-bolt/3.73 14 Bolt/3.73 IRS
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
Guys, thanks for the responses.
I have the rubber motor mounts and engine clamshells already, picked 'em up off of fleabay.
John, I just sent you a PM on those accessories. That sounds like what I need.
Chiz, if you can post some pics of the setup you have, that would be awesome.
Thanks!
I have the rubber motor mounts and engine clamshells already, picked 'em up off of fleabay.
John, I just sent you a PM on those accessories. That sounds like what I need.
Chiz, if you can post some pics of the setup you have, that would be awesome.
Thanks!
Want a title? Post!
Joined: Mar 2008
Posts: 0
Likes: 0
From: New Hampshire
Car: 1985 S10 Pickup
Engine: 383 SBC
Transmission: TH350
Axle/Gears: 9" Ford (Narrowed w/4.10 gears)
Re: Need a few V8 Swap Parts: Mounts, MAF, Accessories
I have a MAF Burnoff relay (New in box) that I don't need). AC Delco Original equipment.
$15. Free Shipping.
$15. Free Shipping.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 25, 2015 11:49 PM







