Like the title says, Id like to find a good used LT4 Hot Cam. Just doing a mild build, and am running short of funds. Cant afford $300 for a cam. But, if you have a used one that wasnt quite big enough for you, Id sure like to take it off your hands.

EDIT:OK! Got a cam coming, thanks for looking.

 

Bump!

 

Another bump!

 

Nobody?

 

Think I may have one. Let me check.

 

Cool! Thanks!

 

I do have it, bought it from a guy on here and I never used it. Checking to make sure it is a hotcam

 

Lunati is blowing out their version of the lt4 hot cam.
I just picked one up for $70 plus shipping.
This is the cam: http://www.lunatipower.com/Product.aspx?id=2607
This is the cam card: http://www.lunatipower.com/CamSpecCa...rtNumber=10030
This is the link for their overstock list: http://www.lunatipower.com/News.aspx?id=109

The cam also has a lobe for a fuel pump if you need it.

 

Hmm....anybody know if there's any difference for better or for worse with the Lunati cam?

 

The specs are basically identical.
*edit*

Lunati:
IVO - 1
IVC - 37
EVC - -2
EVO - 50
List with 1.5 rockers .503 intake and exhaust
112° Lobe Centerline

Lt4 hot cam:
IVO = 0.3
IVC = 38.8
EVO = 49.1
EVC = -0.2
Lift with 1.5 rockers .492 intake and exhaust
112° Lobe Centerline

 

Looking at the specs, it appears the Lunati cam doesn't have as much lift.....actually, it has more. .503 with 1.5 rockers.

 

Sorry, I guess I'm a little gun shy. I once was talked out of a Comp cam in favor of a Howard's cam that 'Had the same specs'. I fought that cam for years......

 

If the Lunati really is comparable, I'll jump on it. But I'd really like to hear from someone who has used it.

 

I had it backwards. The hot cam has .492 lift. So, am I going to run into problems with the LT4 springs I'm already running? The Lunati cam has .503 lift and that's with 1.5 rockers....I'm running 1.6s....

 

It would work out to around .535 lift.
I'm running beehive springs and comp retainers so I can't help with the specs of the hotcam recommend springs.

Give Lunati a call and talk to their reps. They seem to be helpful without trying to sell you something you dont need. They said I'd be okay with the beehives even though they have a lower open pressure then the springs recommended with their cam.

Or........ Just buy TTOP350's and don't worry about it.

 

OK. Lunati cam is on its way!! Thanks everybody!

 

Just bought the lunati cam. Hope it works...

 

Just got one too, along with a F-car LT1 to build for my 1980 Corvette.

 

I bought these springs to go along with my cam and 1.6 rockers...

http://www.alexsparts.com/lt1-valve-...rs-locks-cups/

 

Love to see pics and a build thread on this...