a bit of info needed correct me if i am mistaken please
Thread Starter
Supreme Member
Joined: Sep 2000
Posts: 1,370
Likes: 0
From: Chicago, IL
Car: 86 Z28
Engine: 305
Transmission: 700r4
Axle/Gears: TBD
a bit of info needed correct me if i am mistaken please
lets see if i'm on a roll
96+ full size truck =vortech 350 hydralic roller
90-93 caprice = hydralic roller 350 or 305
89-95 fullsize truck = hydralic roller 350 or 305
89-92 camaro = hydralic roller 350 or 305
87-90 vette = roller 350?
96+ full size truck =vortech 350 hydralic roller
90-93 caprice = hydralic roller 350 or 305
89-95 fullsize truck = hydralic roller 350 or 305
89-92 camaro = hydralic roller 350 or 305
87-90 vette = roller 350?
Last edited by redcamaro83; Jun 26, 2003 at 08:11 AM.
Thread Starter
Supreme Member
Joined: Sep 2000
Posts: 1,370
Likes: 0
From: Chicago, IL
Car: 86 Z28
Engine: 305
Transmission: 700r4
Axle/Gears: TBD
really i'm only looking for roller 350's
i want to use a roller cam with motor and don't want to retro fit an older block
i want to use a roller cam with motor and don't want to retro fit an older block
Senior Member
Joined: Oct 2002
Posts: 798
Likes: 0
From: Sharonville OH
Car: 98 Z28 vert
Engine: LS1
Transmission: automagic
Axle/Gears: 2.73 - boo racing yay MPG
Most of those truck did not have roller cams installed. Some have the bosses in the lifter valley for a roller, some have them drilled and tapped, some don't.Sooooo pop off the intake and find out.
Senior Member
Joined: Oct 2002
Posts: 798
Likes: 0
From: Sharonville OH
Car: 98 Z28 vert
Engine: LS1
Transmission: automagic
Axle/Gears: 2.73 - boo racing yay MPG
Do a search. One of the machineist type guys on here listed the part numbers for the blocks that have the RR lifter system.
Thread
Thread Starter
Forum
Replies
Last Post