Injection to carb
Thread Starter
Member
Joined: Jul 2005
Posts: 477
Likes: 0
From: Manchester: UK
Car: Was 3rd Gen now MustangGT
Engine: 302
Transmission: Auto
Axle/Gears: 3:73:1
Injection to carb
Ive seen a cheap 305 engine for sale, [i would like a 350 but you never find them here ] its out of an 1985 Iroc z and complete.
Its injected, so would all the stuff from my 83 carbed 305 fit?
Ive got an Edelbrock manifold, carb, Mallory dizzy, would things like the exhaust manifolds bolt right up?
In other words is it a fairly straight swap?
Thanks for any help, pointers or tips.
Its injected, so would all the stuff from my 83 carbed 305 fit?
Ive got an Edelbrock manifold, carb, Mallory dizzy, would things like the exhaust manifolds bolt right up?
In other words is it a fairly straight swap?
Thanks for any help, pointers or tips.
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
It's a very straight swap. The longblocks were identical except for pistons and cam, with the FI engine having the better ones.
Should run great with the carb stuff on it.
Should run great with the carb stuff on it.
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Oh, if you're getting everything, the exhaust in the FI car is also the better stuff.
Thread
Thread Starter
Forum
Replies
Last Post