Does anyone have any videos, pictures of a BBC in a firebird/camaro.
I know there are pictures on here already, but tgo takes foreverrr on my phone so it's a little easier if they are on one thread.

Thanks for the help!
-Nick.

 

Get a better internet connection than a phone.

 

Woah. More room then I thought. I thought it be all the way up front.

I traded my computer for my iPhone.

 

I'll let Stephen give the details in case I'm wrong, but in the other BBC swap pics I've seen it looks like the motor is alot closer to the radiator, I think he has moved things around for clearance.

 

This is what I'm talking about,

https://www.thirdgen.org/forums/engi...-454-swap.html

Check out post #9, picture 3.

 

here's a photo of mine

 

Mine is only moved back about an inch or so and dropped down a bit. I also don't have a huge factory rad and rad support in the way. The cowl is gone. The heater/AC box is gone.

 

hehe....I keep finding different threads, with people talking about info from me, for things like this.

PM me your email address & Ill send it to you via email.......the Hot Rod magazine article on a BBC swap into 3rd gens.

 

They're talking about me usually and especially when dealing with a BBC.

 

Maybe....

But when I see people quoting "Stephen 87 IROC" & I know that is not me. He was talking about the Hot Rod magazine article I have, that TGO has lost, it used to be part of the site when we founded TGO.

 

Heres pictures of my big block installed with old 1978 vbelt hardware, performer 2.0 intake, and dual fans taken from a 5.7l iroc.

 

Here's some pictures of the same engine with march mid mound alternator/power steering brackets, and their high cooling serpentine conversion. This is shown with the stock 5.0 l radiator and dual fans from a 5.7l iroc.

 

Here's mine during mock up. Only lowered .5 inch. This was before front and mid plate installation. Still a lot of room left.

 

Here's one of my buddy's T/A with a 454.

 

http://www.youtube.com/watch?v=SbuKzXnzdDU

 

wow, i can only hope mine turns out that clean...nice.