Question on 91 RS V6 to carb 350.......
Thread Starter
Junior Member
Joined: Oct 2000
Posts: 4
Likes: 0
Question on 91 RS V6 to carb 350.......
I am planning on swapping out the V6 for a carbed 350. I will be swapping out the T5 for a T56 from a late camaro/transam. My questions are in what distributor to use?
I have a 89 block, is there a special distributor for the roller cams gear? I plan to use MSD and a 6al. My motor plans are as follows:
350 long rod
AFR 195's or Trick Flow 23*
Performer RPM
3310-1 780 cfm vac. holley (old school)
I am unsure on the cam, I would like to have the heads flowed and one custom grinded, who is the cam man around here?
I have a 89 block, is there a special distributor for the roller cams gear? I plan to use MSD and a 6al. My motor plans are as follows:
350 long rod
AFR 195's or Trick Flow 23*
Performer RPM
3310-1 780 cfm vac. holley (old school)
I am unsure on the cam, I would like to have the heads flowed and one custom grinded, who is the cam man around here?
Thread
Thread Starter
Forum
Replies
Last Post
sreZ28
Engine/Drivetrain/Suspension Parts for Sale
5
Oct 22, 2015 08:21 AM
