13Tango

Hi there, thanks for taking the time to look. I need a little help. It's fairly straight-forward, just cant seem to find the info I need.

I am dropping a 350 back into my engine bay. I pulled the old engine mounts out to replace them, and along the way seemed to have "misplaced" them.

Does anybody happen to know what size bolts and other hardware i need? I am in need of the fasteners that hold the mounts to the frame, and the ones to hold the engine to the mounts.

sofakingdom

iTrader: (1)

Mounts to frame = 3/8-16 x 1" + flanged nuts; mounts to block = 3/8"-16 x ¾"

All common parts store items

13Tango

Thank you very much. That should get me off the couch for the day.

13Tango

Also, would you happen to know the bolt size tof the long bolt that holds both mount together?

AlkyIROC

Should be a 5/8" bolt but is also a special bolt. Although you could use a generic bolt, you should get the proper bolts for that.

13Tango

Thanks for that. I appreciate all the help I can get from you guys.

watajob

iTrader: (29)

I know the bolt head and nut are 2 different sizes. Another of the 80's-90's General's inexplicable ideas.

AlkyIROC

My mistake, the bolt should be 7/16" not 5/8" All 7/16" bolts have a 5/8" head and the 7/16" nuts are 11/16"