Exhaust Post your questions and suggestions about stock or aftermarket exhaust setups. Third Gen exhaust sound files and videos!

thoughts on this exaust

Thread Tools
 
Search this Thread
 
Old May 16, 2015 | 07:28 PM
  #1  
tgarcia76513's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 13
Likes: 0
thoughts on this exaust

I need an exaust for my 89 rs since my sister ripped the old one off with her excellent driving. I came across this on Craigslist for 100. I have never seen one like this and wanted to check with the 3rd gen pros b4 I made the purchase. Any input would be greatly appreciated.
Reply
Old May 16, 2015 | 07:33 PM
  #2  
tgarcia76513's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 13
Likes: 0
Re: thoughts on this exaust

Here is pic
Attached Thumbnails thoughts on this exaust-20150504_065157.jpg  
Reply
Old May 18, 2015 | 07:15 AM
  #3  
killer777's Avatar
Member
 
Joined: Aug 2012
Posts: 155
Likes: 0
From: Fort Wayne, Indiana
Car: 1989 Firebird Trans Am
Engine: 355
Transmission: T56
Re: thoughts on this exaust

Originally Posted by tgarcia76513
Here is pic
Looks custom. As long as it flows well (the bends aren't crap) should beat stock, but it's not duals from the cat back it looks like. You may just be better off buying a new one for 300 more or so. It'll go together easier, look better, and undoubtedbly last longer.
Reply
Old May 18, 2015 | 07:19 AM
  #4  
MoJoe's Avatar
Senior Member
15 Year Member
iTrader: (5)
 
Joined: Jan 2009
Posts: 887
Likes: 17
From: Golden, CO
Car: 87 IROC
Engine: L31 350
Transmission: T56
Axle/Gears: 4.10 D44
Re: thoughts on this exaust

Looks like factory 82's-ish take off. I bet a cork would flow better.

Move along. These are not the droids you're looking for...
Reply
Old May 18, 2015 | 07:34 PM
  #5  
tgarcia76513's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2012
Posts: 13
Likes: 0
Re: thoughts on this exaust

Originally Posted by MoJoe
Looks like factory 82's-ish take off. I bet a cork would flow better.

Move along. These are not the droids you're looking for...
Yea he said it came off of his 84 z28. I thought the way it t's at the back seemed like it would restrict flow. I tthink i will save my lunch money and get a flowmaster American thunder instead.
Reply
Old May 18, 2015 | 08:59 PM
  #6  
midias's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2004
Posts: 4,528
Likes: 240
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: thoughts on this exaust

Originally Posted by tgarcia76513
Yea he said it came off of his 84 z28. I thought the way it t's at the back seemed like it would restrict flow. I tthink i will save my lunch money and get a flowmaster American thunder instead.
Save your money but buy something better than that

Last edited by midias; May 19, 2015 at 07:51 AM.
Reply
Old May 18, 2015 | 09:36 PM
  #7  
Ron U.S.M.C.'s Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 4,482
Likes: 10
From: Northern, CA
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: thoughts on this exaust

Flowmaster has a very distenced sound all of its own and there are guys that like the Flowmaster and there are guys that don't.
There are other mufflers that will flow better than the Flowmaster 80 Series muffler but on my DD it really does not matter.

The Flowmaster 3" American Thunder CAT back with 80 Series muffler is what I have and I can tell you it is most likely the loudest muffler/ststem there is (using stock cars as comparison).
You will hear it inside and out.
If you don't want to hear it well inside than its not for you.

Last edited by Ron U.S.M.C.; May 18, 2015 at 09:45 PM.
Reply
Old May 18, 2015 | 09:40 PM
  #8  
mk1431's Avatar
Member
15 Year Member
 
Joined: Jul 2006
Posts: 176
Likes: 1
From: Las Vegas,NV
Car: 89GTA Black, Black cloth
Engine: LB9 26,000 miles
Transmission: T5
Axle/Gears: 3.45 Australian 9 bolt
Re: thoughts on this exaust

i have the flowmaster American thunder on my lb9 tran am gta and have gotten so many compliments on it save the money and get the flowmaster
Reply
Old May 19, 2015 | 07:07 AM
  #9  
dmccain's Avatar
Supreme Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Mar 2014
Posts: 4,553
Likes: 806
From: South Ms
Car: 89 Firebird
Engine: 355 TBI
Transmission: 700R4
Axle/Gears: 10 Bolt.Posi-3.73s
Re: thoughts on this exaust

Flowmaster is hard to beat for the sound. Only exhaust ive had on any 3rd gen I liked better was Borla and ive had most of them or atleast heard them. Summit has a 3in cat-back system around $259 that sounds great as well
Reply
Old May 19, 2015 | 07:50 AM
  #10  
midias's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2004
Posts: 4,528
Likes: 240
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: thoughts on this exaust

If you want a flowmaster just watch craigslist. I have seen a bunch in the last few years and even picked up a few for <120 in great shape. They are loud though and they drone like crazy on the open road.
Reply
Old May 20, 2015 | 01:34 AM
  #11  
Ron U.S.M.C.'s Avatar
Supreme Member
 
Joined: Apr 2006
Posts: 4,482
Likes: 10
From: Northern, CA
Car: 1989 Iroc-Z Camaro
Engine: TBI,5.0
Transmission: Automatic 700R4
Axle/Gears: Eaton Posi,3.42,LPW Ultimate Cover
Re: thoughts on this exaust

I did a little research on what causes drone.
It is specifically the sound resonance that the muffler makes at different speeds.
Manufacturers of some popular mufflers for our cars build there's taking that specific sound frequency range out of the build using different techniques.
Flowmaster is different. In order to get their trademark sound it is left in.
Reply
Old May 20, 2015 | 06:52 AM
  #12  
Camaro86IrocZ's Avatar
Member
10 Year Member
iTrader: (1)
 
Joined: Jan 2010
Posts: 270
Likes: 17
Car: '86 Iroc Z & '91 RS
Engine: 305 TPI & 305 Qjet - Future LC9
Transmission: 700R4
Axle/Gears: 3.23
Re: thoughts on this exaust

DynoMax Super Turbo cat back can be had for $200 new,, maybe not quite the build of other brands ,,, a bit louder than stock,, and no drone..

https://www.thirdgen.org/forums/exha...t-dynomax.html
Reply
Old May 20, 2015 | 07:33 AM
  #13  
midias's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2004
Posts: 4,528
Likes: 240
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: thoughts on this exaust

Originally Posted by Ron U.S.M.C.
I did a little research on what causes drone.
It is specifically the sound resonance that the muffler makes at different speeds.
Manufacturers of some popular mufflers for our cars build there's taking that specific sound frequency range out of the build using different techniques.
Flowmaster is different. In order to get their trademark sound it is left in.

Adding a dynomax bullet to flow master exhausts makes them much more liveable while cruising
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Elephantismo
Electronics
14
Feb 13, 2019 12:51 AM
David Frans
Camaros for Sale
1
Oct 31, 2015 08:12 PM
Damon
Tech / General Engine
8
Sep 26, 2015 04:29 PM
RedLeader289
Electronics
6
Sep 23, 2015 06:50 AM
IROCZ1989
Transmissions and Drivetrain
2
Sep 4, 2015 11:54 AM




All times are GMT -5. The time now is 12:51 AM.