84 firebird white/blue int. located in eastern PA
10-15-2006, 08:43 PM
#1
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
84 firebird white/blue int. $600 located in eastern PA
1984 V6 pontiac firebird for sale. Purchased in January 2006 and has been garage kept since.
White with blue (since painted black) interior. seats are sun faded and have rips and tears, rear carpet has been pulled to due water damage from previous owner. interior panels pulled and painted black with krylon fusion paint. This would make a good parts car if you need some fenders or a few interior peices.
block has been said to be cracked, or so previous owner told me. never really got it checked out, since i have planned to do a 350/700r4 conversion...but dont have the time, money, or means to do so currently. need to make room for future projects.
$600.00 obo
or contact me if interested in specific parts.
car located in jenkintown, PA 19046
White with blue (since painted black) interior. seats are sun faded and have rips and tears, rear carpet has been pulled to due water damage from previous owner. interior panels pulled and painted black with krylon fusion paint. This would make a good parts car if you need some fenders or a few interior peices.
block has been said to be cracked, or so previous owner told me. never really got it checked out, since i have planned to do a 350/700r4 conversion...but dont have the time, money, or means to do so currently. need to make room for future projects.
$600.00 obo
or contact me if interested in specific parts.
car located in jenkintown, PA 19046
Last edited by 84FirebirdChick; 10-17-2006 at 09:20 PM.
10-16-2006, 11:10 AM
#2
Junior Member
Join Date: Jun 2006
Location: West Chester, PA / Brick, NJ
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Dodge Dakota / 91 Jeep Cherokee
Engine: 5.9L / 4.0L
Transmission: A518 / NV3550
Axle/Gears: 8 1/4 w. 3.91's / D30&D44 w. 3.55
BUMP! Good luck baby. Hate to see the '84 go, but we gotta get that '88 on the road 
10-17-2006, 12:34 PM
#3
Member
Join Date: Jul 2004
Location: Eastside
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Buick Regal T
Engine: 87 3.8 turbo/lc2 drive train
Transmission: 200r4brf
I'm interested send pics kojo300zx@yahoo.com I'm in pa
10-17-2006, 03:41 PM
#4
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
are you interested in entire car, or just specific parts? i'll go out the garage and take pics later on tonight, so i'll get those to yas asap. where in PA are you located out of curiosity?
10-17-2006, 09:15 PM
#5
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
heres a front view pic (ignore the sorry a$$ cowl hood...thats how it was when i bought it from the junk yard...im too timid to try my luck at refinishing fiberglass at the moment...and im trading it anyways...) and pics of the front bumper grills/louvers.
im getting some offers for the entire car, others for specific parts, so whichever i get more requests on, and depending on offers will ultimately decide what is in the future for this car...
honestly, its not a big project if you have the means and time and the budget to redo the interior and drop in an engine and trans. but i do not have the space, nor money, or facilities to do so. so, this is a solid car, little bumps here and there, never hit. its a very straight car...of course there's the typically fbody issue with doors needing new pins, not a big deal if you have a lathe and are able to do that your self. if not, they're still not too expensive. but right now, this car is just burning a hole in my pocket...so it needs to leave...so i can buy another project...
im getting some offers for the entire car, others for specific parts, so whichever i get more requests on, and depending on offers will ultimately decide what is in the future for this car...
honestly, its not a big project if you have the means and time and the budget to redo the interior and drop in an engine and trans. but i do not have the space, nor money, or facilities to do so. so, this is a solid car, little bumps here and there, never hit. its a very straight car...of course there's the typically fbody issue with doors needing new pins, not a big deal if you have a lathe and are able to do that your self. if not, they're still not too expensive. but right now, this car is just burning a hole in my pocket...so it needs to leave...so i can buy another project...
10-17-2006, 09:19 PM
#6
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
few more random pics that i just took tonight
and im sure that 51,952 miles, actually is 151,952... the owner before me drove it for about 1000 or less miles, and i have driven it not even a mile, since it has not left my driveway since january.
and im sure that 51,952 miles, actually is 151,952... the owner before me drove it for about 1000 or less miles, and i have driven it not even a mile, since it has not left my driveway since january.
10-18-2006, 09:43 AM
#7
Supreme Member
iTrader: (26)
Join Date: Nov 2002
Location: Moneta, VA
Posts: 2,108
Likes: 0
Received 5 Likes
on
5 Posts
Car: 89 formula 350
Engine: ls1 magnuson tvs2300 supercharger
Transmission: T56
Axle/Gears: 4.11 Dana 44!
can Iget some more detailed shots of the interior (dashboard etc) and more exterior shots please?
Trending Topics
10-18-2006, 03:57 PM
#9
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
and a few more...i dont have many interior shots on my computer, so i can go out later on tonight and take some.
10-19-2006, 01:08 AM
#10
Junior Member
Join Date: Nov 2003
Location: south central pa
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 trans am
Engine: lg4
Transmission: t5
Axle/Gears: 3.27 9 bolt
hey look...my hood ...i want that front bumper cover and the bumper support, when you come pick up the formy hood maybe i'll have afew other things i can think of...i can even come pull the stuf myself since i think i can fit it in my formula
...i want that front bumper cover and the bumper support, when you come pick up the formy hood maybe i'll have afew other things i can think of...i can even come pull the stuf myself since i think i can fit it in my formula
10-19-2006, 09:10 AM
#11
Member
Thread Starter
Join Date: Jun 2006
Location: Jenkintown, PA
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Car: 00 F-bird/84 F-bird/88 Formula
Engine: 3.8L/2.8L/5.0L 305
hey dan, dunno if im really gonna part this car out of not yet...i'd rather sell it whole, so i dont end up with a rolling chassis, lol. my mom would pi$$ her self lol.
but yea, i told you that hood was scary...lol. im tempted to just rattle can the thing with primer...but im not gonna touch it, if you want it. i saw a few of your posts on fbody.com...i never realized how some of those people can be so irritating and sarcastic, i decided not to join over there, and i'll stay here, where everyone is nice. lol.
so, not sure on parting out, hood is fine, b/c i can put the 2" pin on her from my formy.
but yea, i told you that hood was scary...lol. im tempted to just rattle can the thing with primer...but im not gonna touch it, if you want it. i saw a few of your posts on fbody.com...i never realized how some of those people can be so irritating and sarcastic, i decided not to join over there, and i'll stay here, where everyone is nice. lol.
so, not sure on parting out, hood is fine, b/c i can put the 2" pin on her from my formy.
10-19-2006, 11:06 AM
#12
Junior Member
Join Date: Nov 2003
Location: south central pa
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 trans am
Engine: lg4
Transmission: t5
Axle/Gears: 3.27 9 bolt
oh well..i dunno if i can come up with the $ to buy the whole thing..but if you do part..i got dibbs
and yeah.fbody.com ..especially the third gen section..is full or morons..i probably wouldnt hang around at all but i'm a moderator..lol
and yeah.fbody.com ..especially the third gen section..is full or morons..i probably wouldnt hang around at all but i'm a moderator..lol
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
