[TX] Need tan plastics for my 92 TA vert

Thread Tools
 
Search this Thread
 
Old Jun 5, 2011 | 02:30 AM
  #1  
TX T/A's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 93
Likes: 0
From: Humble, TX
Car: 1992 Trans Am Conv.
Engine: 305 TPI
Transmission: Auto
Need tan plastics for my 92 TA vert

Need 92 tan Trans Am plastics for my convertible

Kick panels
Door sills
Door panels
Armrests
Rear quarters

Please send pics/price shipped to 77338
Thanks
Reply
Old Jun 8, 2011 | 09:22 PM
  #2  
Thadius856's Avatar
Junior Member
 
Joined: May 2008
Posts: 4
Likes: 0
Re: Need tan plastics for my 92 TA vert

Have a 90 3.1 hardtop with all of those pieces in tan, assuming they fit. Only missing rear driver-side seatbelt cover and front passenger headrest/seatbelt guide.

Shipping at cost from 95903. Interested?
Reply
Old Jul 4, 2011 | 12:40 AM
  #3  
TX T/A's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 93
Likes: 0
From: Humble, TX
Car: 1992 Trans Am Conv.
Engine: 305 TPI
Transmission: Auto
Re: Need tan plastics for my 92 TA vert

Bump
Still need 92 Trans Am tan plastics. Door panels, kick panels, door sills, convertible rear quarters
Reply
Old Jul 7, 2011 | 12:32 PM
  #4  
claytonjn's Avatar
Member
iTrader: (5)
 
Joined: Jun 2010
Posts: 200
Likes: 0
From: Michigan, USA
Car: '92 Camaro Vert
Engine: 305 TBI V8
Re: Need tan plastics for my 92 TA vert

I've got a full interior in tan from a 1992 Camaro Convertible. Kick panels, door sills, door panels, arm rests, the rear arm rest/speaker panels. I also have the "J" shaped pieces that extend from the door sill towards the rear and up the door frame, tan seat belt guides, fill set of tan seat belts, seats, carpet, center console, etc. Here's some pictures of my interior:
http://s289.photobucket.com/albums/l...view=slideshow


Let me know what you're interested in and we can go from there...
Reply
Old Jul 7, 2011 | 02:36 PM
  #5  
TX T/A's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 93
Likes: 0
From: Humble, TX
Car: 1992 Trans Am Conv.
Engine: 305 TPI
Transmission: Auto
Re: Need tan plastics for my 92 TA vert

Very interested, pm sent
Reply
Old Jul 11, 2011 | 02:01 AM
  #6  
TX T/A's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 93
Likes: 0
From: Humble, TX
Car: 1992 Trans Am Conv.
Engine: 305 TPI
Transmission: Auto
Re: Need tan plastics for my 92 TA vert

JamMaster, are the camaro and TA the same when it comes to tan plastics for 92? Pics looked darker. Just asking
Reply
Old Jul 11, 2011 | 08:27 AM
  #7  
claytonjn's Avatar
Member
iTrader: (5)
 
Joined: Jun 2010
Posts: 200
Likes: 0
From: Michigan, USA
Car: '92 Camaro Vert
Engine: 305 TBI V8
Re: Need tan plastics for my 92 TA vert

The kick panels and door sills are interchangeable with non-convertible third gens. The other piece is modified from the non-convertibles. So all of the plastics are basically whatever color was in the car when it was sent to ASC for the conversion. As far as I know the colors for the Pontiacs and Chevys were the same, but I'm no expert so I can't guarantee anything. I took the pictures at 2am in my poorly lit bedroom with the flash, so the lighting wasn't exactly ideal. I'll snap some more pictures after work outside in daylight and you should get a better idea. Until then I'll try to look online for conclusive evidence one way or another.
Reply
Old Jul 11, 2011 | 05:28 PM
  #8  
claytonjn's Avatar
Member
iTrader: (5)
 
Joined: Jun 2010
Posts: 200
Likes: 0
From: Michigan, USA
Car: '92 Camaro Vert
Engine: 305 TBI V8
Re: Need tan plastics for my 92 TA vert

Here's some more pictures: http://s908.photobucket.com/albums/a...an%20Plastics/

I had to take them inside because it just finished storming, but the windows were wide open so it's all natural light. The paper with the grey rectangles is there to ensure 100% color accuracy in the photos. Keep in mind however that each computer monitor has a different color profile so unless you have it calibrated for color accuracy each monitor will make the photos look slightly different.

I got everything boxed up and just got off the phone with the shipping company. They quoted me at $35 for shipping. I could do $190 shipped, and I'll drop them off tomorrow. PayPal is JamMasterClay@gmail.com
Reply
Old Jul 12, 2011 | 01:08 AM
  #9  
kurfbird's Avatar
Senior Member
iTrader: (24)
 
Joined: Dec 2004
Posts: 712
Likes: 1
From: washington state
Car: 1992 Firebird v6 1992 formula v8
Engine: 3.1, 350 TPI
Transmission: both 700 r4
Re: Need tan plastics for my 92 TA vert

Also there is a brown in 92 hardtop / t top that is very close to the beachwood tan. Not sure if the convertable are the same or not. I found this out from a guy in canada that brought the beachwood and needed the brown door sills.

Just for your info.
Reply
Old Jul 12, 2011 | 07:23 AM
  #10  
claytonjn's Avatar
Member
iTrader: (5)
 
Joined: Jun 2010
Posts: 200
Likes: 0
From: Michigan, USA
Car: '92 Camaro Vert
Engine: 305 TBI V8
Re: Need tan plastics for my 92 TA vert

Can you take a look at the pictures I posted and verify that they are tan?
Reply
Old Jul 12, 2011 | 04:43 PM
  #11  
TX T/A's Avatar
Thread Starter
Junior Member
iTrader: (1)
 
Joined: Nov 2009
Posts: 93
Likes: 0
From: Humble, TX
Car: 1992 Trans Am Conv.
Engine: 305 TPI
Transmission: Auto
Re: Need tan plastics for my 92 TA vert

PM sent, I think they're the same. 92 tan looks more tuape like
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MrPackstin
Interior Parts for Sale
11
Oct 25, 2017 08:09 PM
sparks454
Interior Parts Wanted
4
Oct 18, 2015 03:18 PM
okfoz
History / Originality
27
Oct 13, 2015 02:19 PM
tcarlos13
Interior Parts Wanted
0
Sep 28, 2015 06:31 PM
89bird2.8
Tech / General Engine
0
Sep 25, 2015 09:21 AM




All times are GMT -5. The time now is 02:50 PM.