[MI] Overhead Console Pouch and Swivel Light
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 613
Likes: 5
From: Michigan
Car: 1985 IROC-Z
Engine: LB9
Transmission: MD8
Overhead Console Pouch and Swivel Light
Looking for the sunglasses pouch and working swivel light for my overhead console. Let me know what you have.
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Overhead Console Pouch and Swivel Light
I have the pouch and swivel maplight for an overhead console
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Overhead Console Pouch and Swivel Light
Here are the pics....Hows 20 dollars shipped sound?
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 613
Likes: 5
From: Michigan
Car: 1985 IROC-Z
Engine: LB9
Transmission: MD8
Re: Overhead Console Pouch and Swivel Light
Damn really wish the bag had the mounting plastic still attached. Not sure how I would get it to mount on my console without it... 
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Overhead Console Pouch and Swivel Light
I have the plastic backings too.I usually attach them with adhesive
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 613
Likes: 5
From: Michigan
Car: 1985 IROC-Z
Engine: LB9
Transmission: MD8
Re: Overhead Console Pouch and Swivel Light
Ok. Yeah I have no idea how these things attach. When I bought my car it looks as if someone just tore the bag down from where it attaches to the plastic backing.
Is it hard to attach a bag to a backing? Is the glue secure?
Is it hard to attach a bag to a backing? Is the glue secure?
Trending Topics
Joined: Feb 2004
Posts: 1,942
Likes: 30
From: Levittown Pa
Car: 89 Iroc Convertible
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.27 Posi 9 bolt PBR
Re: Overhead Console Pouch and Swivel Light
Not really Ive attached several and it seems to hold up pretty good.You have the plastic backing piece still attached to your console.All you need to do is remove the 6 small snap rings that attach the plastic trim piece.Be carefull because they usually break.Once you have the plastic trim piece off you will see where they originally glued the pouch on.I usually apply adhesive to the back of the plastic trim piece and then fit the pouch into place as I am putting it back onto the console itself.
Thread
Thread Starter
Forum
Replies
Last Post
