i mean i know they can FIT but will they correctly bolt up with out modifying???? or is the 82 - 92 bolt pattern same with 93-02??? 82-02??? because i see so many people with this conversion done and i would like to do this as well

 

Yes they bolt right up. Just finished putting mine in the other day, Best modification so far.
No Modifying necessary.

i own 86 IROC, and i have 98-02 camaro Seats in now.

 

so i wont need to swap the brackets over or anything like that???? and what about the rear seats they bolt and fit in perfectly as well

 

If the 4th gen seats come with the brackets (seat rails) on them (which mine did) they bolt right on (usually the seat rails are on).
Honestly, all i did was put it in the car, lift it up, and plop it down and all of them lined up, put the bolts and it works fine.

Rear seats are bolt up as well, although on mine i have noticed that if you push on a seat on the far left or right it kinda bends funny, but it is not a problem for me.

 

These are the Rear seats in, and the front seats out (they are now in just dont have a picture)

 

If your 3rd gen currently has the power seat track, you can remove it from the current seat and it will bolt perfectly onto the 4th gen seat.

 

looks like a very nice interior aqualordx93.

 

actually the current seats i have now are not electrical so im pretty sure it wont have the connections either for electrical seats to work for it either i wont know till i take them out and i doubt it pretty much sounds like im gonna have to transfer my seat rails over....

 

If you would like to keep the new seat power, just wire it directly to the fusebox and make sure to a fuse in the link/wire to box, so you dont burn your car down!!!

 

Or tap into the wires in the kickpanel, just use a test light to find a hot wire and tap into it, Walla!!! Power seat!!!